From: Desyatnik, Yan (Yan.Desyatnik@xxxxxxx)
Date: Wed Jan 17 2001 - 16:37:46 GMT-3
Steve,
You cannot policy route based on destination only based on source.
To manipulate traffic based on destination use static, metrics, tunnels.
Yan.
-----Original Message-----
From: Steve Clubb [mailto:sclubb@cattech.com]
Sent: Wednesday, January 17, 2001 2:04 PM
To: 'ccielab@groupstudy.com'
Subject: policy routing
Hey people -
I have a situation where I want to forward traffic going to
a certain subnet
out an interface or to a next-hop IP. All other traffic to
take the default
route configured on the router. I can't use a static route.
I tried this
but it's not working. Any ideas?
ip local policy route-map policy
ip classless
ip route 0.0.0.0 0.0.0.0 64.168.75.12
!
access-list 1 permit 137.20.0.0 0.0.255.255
access-list 2 permit any
!
!
!
route-map policy permit 10
match ip address 1
set ip default next-hop 137.20.29.2
!
route-map policy permit 20
match ip address 2
Thanks,
Steve
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:33 GMT-3