From: Patrick Bikar (pbikar@xxxxxxxxx)
Date: Wed Jan 17 2001 - 08:47:47 GMT-3
I think it is not possible. The onlyy thing you may do is use the "preference"
command in order to make the choice between the 2 dial-peers deterministic.
default preference is 0, and a higher preference is ... prefered.
Cheers,
Patrick.
At 17:40 16/01/2001 -0800, Daniel Ji wrote:
>Hi,=20
>Can anyone tell me how to load-balancing calls among different dial =
>peers.=20
>
>for example,=20
>-----------------------------------------------------------------------
>dial-peer voice 6261 voip
> destination-pattern 1626T
> session target ipv4:10.1.1.33
>!
>dial-peer voice 6262 voip
> destination-pattern 1626T
> session target ipv4:10.1.1.44=20
>-----------------------------------------------------------------------
>
>Is there anyway to load balancing(round-robin type) calls for same =
>number(1626-2228888) among 6261 and 6262 dial peers, so that all session =
>target routers(10.1.1.33 and 10.1.1.44) will be evenly utilized.
>
>Thanks for any help on that.
>
>Daniel Ji
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:32 GMT-3