From: Les Hardin (hardinl@xxxxxxx)
Date: Mon Jan 15 2001 - 23:51:37 GMT-3
From the link below.
0 =3D Exact match required. This means that the allowed SAP must have the=20
same value as the SAP configured in the ACL. See the table below for more=20
details.
1 =3D The allowed SAP can have either a 0 or 1 at this bit position, the=20
"don't care" position.
http://www.cisco.com/warp/public/698/acl200.html
Les
At 09:36 PM 1/15/2001 -0500, Kevin Mahoney wrote:
>regular mask... 0 =3D don't care
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Bill Fallon
>Sent: Monday, January 15, 2001 8:13 PM
>To: ccielab@groupstudy.com
>Subject: DLSW MAC ADDR Filtering and Masks
>
>
>
>"The Knot in my stomach is growing tighter as my day draws nearer!!!"
>
>anyway,
>Lab Date is Feb 15th and 16th and need immediate Clarification Pleeease:
>
>1) When doing MAC ADDRESS filters for DLSW what is the correct masking
>structure in the access list. Is it a wild Card mask or a regular mask and
>does F=3D"don't care" and 0=3D"care" or vice versa.
>
>I have gotten a lot of conflicting answers on this.....
>
>ie:
>
>Configure a router to stop explorers for mac addresses beginning with
>4545.6767
>
>What should the access list be:
>
>access-list 700 deny 4545.6767.???? (mask) ????.????.????
>access-list 700 permit ??????(What is the Wilcard permit any?)
>
>
>2) When filtering LSAP and/or Netbios packets, and wild card permit any,
>are these correct?
>
>ie. Permit netbios, deny SNA and Permit everything else ( I know this is
>not the best way to do the access list but I want to make sure the access
>list statments are correct)
>
>access-list 200 deny 0x0000 0x0d0d --->Deny all SNA
>access-list 200 permit 0xf0f0 0x0101 ---->Permit all netbios
>access-list 200 permit 0x0000 0xffff =3D=3D=3D=3D>permit ANY
>
>
>
>
>Thanks in advance,
>Bill
>
>
>
>
>-----------------------------------------------------
>Click here for Free Video!!
>http://www.gohip.com/free_video/
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:31 GMT-3