From: Stephen Masraum (masraum@xxxxxxxxxx)
Date: Mon Jan 15 2001 - 17:29:02 GMT-3
Just a note, there are no Pix on the R&S CCIE, couldn't say about the others
for sure. Not bad info to have however.
Steve
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
malzubt Last Name
Sent: Monday, January 15, 2001 2:19 PM
To: johnny.dedon@exodus.net; ccielab@groupstudy.com
Subject: Re: tunnel mode ipip
I think if Cisco is going to ask about VPNs, its going to be IPSEC, and you
have to know how to use IPSEC and ISAKMP in both HA and ESP modes, I would
practice doing a router-to-router, router-to-pix, and pix-to-pix VPN
gateways, I would also practice doing a VPN client-to-gateway (router or
PIX) and then you should have VPNs covered.
Good luck,
Mohammed.
>From: "Johnny Dedon" <johnny.dedon@exodus.net>
>To: "Chuck Church" <cchurch@MAGNACOM.com>, <ccielab@groupstudy.com>
>Subject: Re: tunnel mode ipip
>Date: Mon, 15 Jan 2001 13:59:21 -0600
>Reply-To: "Johnny Dedon" <johnny.dedon@exodus.net>
>
>Hi Chuck,
>My advice as for VPNs, is it does not require encryption and a tunnel in
any
>mode would be considered a VPN. Read instructions carefully to determine
>what the exact requirements of the VPN are.
>
>Johnny Dedon
>Senior Staff Consultant
>Exodus Professional Services
>johnny.dedon@exodus.net
>www.exodus.net
>----- Original Message -----
>From: "Chuck Church" <cchurch@MAGNACOM.com>
>To: <ccielab@groupstudy.com>
>Sent: Monday, January 15, 2001 1:41 PM
>Subject: RE: tunnel mode ipip
>
>
>> But if they use the term 'VPN', to me that implies using encryption,
>whether
>> IPSec or CET. Is that everyone else's take on the term?
>>
>> Chuck Church
>> CCNP, CCDP, MCNE, MCSE
>> Sr. Network Engineer
>> Magnacom Technologies
>> 140 N. Rt. 303
>> Valley Cottage, NY 10989
>> 845-267-4000 x218
>>
>>
>> -----Original Message-----
>> From: Robert DeVito [mailto:robertdevito@hotmail.com]
>> Sent: Monday, January 15, 2001 12:09 PM
>> To: ashort@wingedwheel.net; ccielab@groupstudy.com
>> Subject: RE: tunnel mode ipip
>>
>>
>> Only if it specifies to use encryption, though.
>>
>>
>> ----Original Message Follows----
>> From: Andrew Short <ashort@wingedwheel.net>
>> Reply-To: Andrew Short <ashort@wingedwheel.net>
>> To: ccielab@groupstudy.com
>> Subject: RE: tunnel mode ipip
>> Date: Mon, 15 Jan 2001 10:17:10 -0600 (CST)
>>
>> On Mon, 15 Jan 2001, Tom Gonter wrote:
>>
>> > Here's a reason. You're running addresses in the 10.0.0.0 space and a
>> > partner company is using addresses in the 10.0.0.0 space or other
>private
>> > space (192.168.0.0,etc...). Private networks aren't routable in the
>> > Internet. However, you can tunnel ip across the Internet to get to
>those
>> > distant private networks.
>>
>> Yeah, but I'd use IPSec tunnel mode for that.
>>
>>
>> >
>> > -----Original Message-----
>> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>> > Chuck Church
>> > Sent: Monday, January 15, 2001 6:52 AM
>> > To: ccielab@groupstudy.com
>> > Subject: RE: tunnel mode ipip
>> >
>> >
>> > But if it's IP only, do you need to use a tunnel? All the times I've
>> setup
>> > VPN between router to router or PIX to PIX, we've never used a tunnel.
>> > Obviously if they want non-IP traffic, use a tunnel, but if it's IP
>only,
>> > why use one? What's the way the lab proctor is going to want to see
>it?
>> >
>> > Chuck Church
>> > CCNP, CCDP, MCNE, MCSE
>> > Sr. Network Engineer
>> > Magnacom Technologies
>> > 140 N. Rt. 303
>> > Valley Cottage, NY 10989
>> > 845-267-4000 x218
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: Kevin Mahoney [mailto:kmahoney1@cfl.rr.com]
>> > Sent: Monday, January 15, 2001 1:31 AM
>> > To: Robert DeVito; ccielab@groupstudy.com
>> > Subject: RE: tunnel mode ipip
>> >
>> >
>> > yep
>> >
>> > -----Original Message-----
>> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>> > Robert DeVito
>> > Sent: Monday, January 15, 2001 6:13 AM
>> > To: kmahoney1@cfl.rr.com; ccielab@groupstudy.com
>> > Subject: RE: tunnel mode ipip
>> >
>> >
>> > So if I come over a scenario that requires to set up a VPN from router
>A
>> to
>> > router B for IP only, use "tunnel mode ipip" instead of the default
>> "tunnel
>> > mode gre"?
>> >
>> > Thanks in advanced,
>> > Robert
>> >
>> >
>> > ----Original Message Follows----
>> > From: "Kevin Mahoney" <kmahoney1@cfl.rr.com>
>> > Reply-To: <kmahoney1@cfl.rr.com>
>> > To: "Robert DeVito" <robertdevito@hotmail.com>,
><ccielab@groupstudy.com>
>> > Subject: RE: tunnel mode ipip
>> > Date: Mon, 15 Jan 2001 00:50:10 -0500
>> >
>> > Tunnel mode ipip is foe setting up VPNs where you want to tunnel ip
>> traffic
>> > over an ip tunnel.
>> >
>> > Kevin
>> >
>> > -----Original Message-----
>> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>> > Robert DeVito
>> > Sent: Monday, January 15, 2001 4:46 AM
>> > To: ccielab@groupstudy.com
>> > Subject: tunnel mode ipip
>> >
>> >
>> > Can someone explain tunnel mode ipip? I can not find anything on the
CD
>> or
>> > CCO... Thank you!
>> >
>> > Robert
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:30 GMT-3