From: Devender Singh (devender.singh@xxxxxxxxxxxxxx)
Date: Mon Jan 15 2001 - 04:43:32 GMT-3
ya, try changing the time may be to a non-zero value.
-----Original Message-----
From: John Dill [mailto:jdill@polarsys.com]
Sent: Monday, 15 January 2001 18:25
To: ccielab@groupstudy.com
Subject: RE: RIP Version 2 Authentication
Stanford,
Your config looks good at first take, although you might roll back the
accept- and send- lifetimes until you get it working.
Any chance you have a trailing space on one of your keys? I wouldn't trust
cut-and-paste. Type them carefully.
John
>>> Stephen Masraum <masraum@swbell.net> 01/14/01 11:09PM >>>
I have gotten it working before. I can't remember the whole config, and
don't have a router handy to check. It's not that hard once you know what
needs to be done. Could you be missing a command under "router rip"?
Steve
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Stanford Wong - CNS
Sent: Monday, January 15, 2001 12:59 AM
To: Ccielab
Subject: RIP Version 2 Authentication
Has anybody out there got RIP authentication working?
I have been working on this for a couple of days it doesn't seem to work.
The connection is two routers connected directly to each other via a
fastethernet connection.
When I do a debug ip rip events all I get is -
00:08:04: RIP: ignored v2 packet from 10.0.0.1 (invalid authentication)
here are the two configs -
---------------------Router D-------------------------
hostname rd
!
key chain turkey
key 1
key-string password1
accept-lifetime 00:00:00 Jan 14 2001 infinite
send-lifetime 00:00:00 Jan 14 2001 infinite
!
interface Loopback0
ip address 4.4.4.4 255.255.255.0
!
interface FastEthernet0
ip address 10.0.0.2 255.255.255.0
ip rip authentication key-chain turkey
speed auto
no cdp enable
!
router rip
version 2
passive-interface Loopback0
network 4.0.0.0
network 10.0.0.0
!
ip classless
-------------------------Router C-------------------------
hostname rc
!
key chain turkey
key 1
key-string password1
accept-lifetime 00:00:00 Jan 14 2001 infinite
send-lifetime 00:00:00 Jan 14 2001 infinite
!
interface Loopback0
ip address 3.3.3.3 255.255.255.0
!
interface FastEthernet0
ip address 10.0.0.1 255.255.255.0
ip rip authentication key-chain turkey
speed auto
no cdp enable
!
router rip
version 2
passive-interface Loopback0
network 3.0.0.0
network 10.0.0.0
!
ip classless
------------------------------------------------------------
Here is the version of IOS that I am using....
IOS (tm) C1700 Software (C1700-SY-M), Version 12.1(1), RELEASE SOFTWARE
(fc1)
Am I missing something or does this thing not even work? Getting a little
frustrated because this should be a no brainer, but it doesn't work.
Thanks in advance for any insight/suggestions.
stanford
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:29 GMT-3