From: Ronnie Royston (RonnieR@xxxxxxxxxxxxxxxxx)
Date: Sun Jan 14 2001 - 23:55:53 GMT-3
Why wouldn't it? Inverse ARP is a dynamic mapping, 'frame map' command is a
static mapping.
If I remember correctly, You must disable inverse arp on the major interface
even if you have 'no frame inverse' on the point-to-multipoint subinterface
to actually disable it (is that what is suprising you, maybe?).
Frame inverse arp works for everything but point-to-point subinterfaces.
For these interface types, it is not needed.
-----Original Message-----
From: Nigel Taylor [mailto:nigel_taylor@hotmail.com]
Sent: Sunday, January 14, 2001 6:48 PM
To: Cisco Group Study; Chuck Larrieu; CCIE_Lab Group Study
Subject: Frame Relay...Inverse-Arp..?
Hi All,
I was working through a number of frame relay lab and made =
some pretty cool observations. The big one being that I had Inverse-Arp =
working as well while using the "frame-map" command. Everything I know =
tells me this shouldn't be but it works.
I reloaded the routers and the Inverse arp worked. Even after shutting =
down the interface and bringing it back up the Inverse-Arp still worked. =
=20
Anyone got any thoughts on how this could be working....?
Nigel...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:29 GMT-3