From: Thomas Alexander (talexander1@xxxxxxxxxxxxx)
Date: Fri Jan 12 2001 - 21:28:38 GMT-3
It is escape-character if you're in config mode.
If you're in a EXEC-MODE, then u need to prefix that with "terminal".
Also, if you do a "show line" for the line that you're logged into, it
will show the escape character for the current session.
Regds/ tom
----- Original Message -----
From: David Ankers <d.ankers@chello.nl>
To: <ccielab@groupstudy.com>
Sent: Friday, January 12, 2001 7:08 PM
Subject: Re: Changing the control sequence
> As Tom said this is the correct thing to do but that little <char> thing
> might cause you some trouble :-)
>
> You need to use the ASCII codes if you want to enter non-normal chars a
> favourite is 23 which is ctrl-shft-w. Also, the command is just
> "escape-character" for the 2500s here anyway.
>
> If you have to set troubleshooting challenges for anyone, change the
escape
> char on the terminal server to be a normal letter (helps if you know the
> password so a least they can login), quite entertaining watching someone
find
> the solution which is of course to type is caps.
>
>
> On Friday 12 January 2001 23:02, Thomas Alexander wrote:
> > You can either put it int the vty config or change it for the current
> > session.
> >
> > I actually prefer doing on the fly from user exec or enable mode which
> > only changes it for the current logged in session.
> >
> > That way you dont mess around with other people logging in and
> > not knowing the escape-sequence.
> >
> > terminal escape-character <char>
> >
> > can be entered in config mode or from exec.
> >
> > Regds/ Tom
> > ----- Original Message -----
> > From: Don Rogers <drogers@icscorp.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Friday, January 12, 2001 3:59 PM
> > Subject: Changing the control sequence
> >
> > > I would like to change the control sequence from "control+shift+6,x"
to
> > > something else. Really do not care what. I have nested terminal
> > > servers. I need a different sequence on each server. I can not find
the
> > > command.
> > >
> > > Any help will be appreciated. Just point me in the right direction.
> > >
> > > Thank you.
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:28 GMT-3