RE: EIGRP over ATM

From: ccie ccie (ccie2001uk@xxxxxxxxx)
Date: Fri Jan 12 2001 - 07:15:46 GMT-3


   
Not exactly my strongest subject, but don't you need
to specify the encapsulation on the ATM interface?

--- Jack Yu <cciecn@yahoo.com> wrote: > Simon,
>
> How about taking off the neighbor command from the
> eigrp config?
>
> Good Luck
>
> Jack
> --- Allyn Baskerville <abaskerville@ibeam.com>
> wrote:
> > I just gave this a shot, but still no success.
> > Thanks for the response,
> > though. Allyn
> >
> > -----Original Message-----
> > From: Simon Baxter
> > [mailto:Simon.Baxter@au.logical.com]
> > Sent: Thursday, January 04, 2001 1:08 AM
> > To: Allyn Baskerville; ccielab@groupstudy.com
> > Subject: RE: EIGRP over ATM
> >
> >
> > Use : "protocol ip 172.32.1.15 broadcast"
> >
> > -----Original Message-----
> > From: Allyn Baskerville
> > [mailto:abaskerville@ibeam.com]
> > Sent: Thursday, January 04, 2001 3:33 PM
> > To: ccielab@groupstudy.com
> > Subject: EIGRP over ATM
> >
> >
> > I ran into a problem today that I can't seem to
> > resolve. I am experiencing
> > a problem with EIGRP neighbors staying up over an
> > ATM link when using either
> > PVCs, SVCs or classical IP. The symptoms are
> exactly
> > the same for all of
> > these. However, I'm not having problems with other
> > routing protocols. The
> > neighbors will come up for 5 seconds, go down for
> 5
> > seconds. I do see
> > hellos on both routers, though:
> >
> > 01:31:58: EIGRP: Sending HELLO on ATM3/0 nbr
> > 172.32.1.15
> > 01:31:58: AS 10, Flags 0x0, Seq 0/0 idbQ 0/0
> iidbQ
> > un/rely 0/0
> > 01:31:59: EIGRP: Received HELLO on ATM3/0 nbr
> > 172.32.1.15
> > 01:31:59: AS 10, Flags 0x0, Seq 0/0 idbQ 0/0
> > 01:32:03: EIGRP: Sending HELLO on ATM3/0 nbr
> > 172.32.1.15
> >
> > The routers are running 12.0.7T, and I reloaded
> them
> > and the ATM switch a
> > couple of times. Do any of you have an idea that I
> > might try? Incidentally,
> > both routers (at least for the PVC configuration)
> > are configured as follows,
> > only the IP and PVC information is changed between
> > the two:
> >
> > interface ATM3/0
> > bandwidth 155000
> > ip address 172.32.1.16 255.255.255.0
> > ip directed-broadcast
> > no ip route-cache
> > no ip mroute-cache
> > no atm ilmi-keepalive
> > pvc toR15 1/116
> > protocol ip 172.32.1.15
> > broadcast
> >
> > router eigrp 10
> > network 172.22.0.0
> > network 172.32.0.0
> > neighbor 172.32.1.15 ATM3/0
> > no auto-summary
> >
> >
> > Thanks - Allyn
> >
> >
>



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:28 GMT-3