From: Atif Awan (atifawan@xxxxxxxxxxx)
Date: Fri Jan 12 2001 - 04:45:00 GMT-3
Even when you have the SR/TLB configured you still need the dlsw
bridge-group 5 statements in both routers. Other than that everything seems
ok to me.
Regards
Atif
>From: "Tom Gonter" <tgonter@cisco.com>
>Reply-To: "Tom Gonter" <tgonter@cisco.com>
>To: <ccielab@groupstudy.com>
>Subject: SR/TLB into DLSW????
>Date: Thu, 11 Jan 2001 22:25:38 -0800
>
>Here's a scenario.
>
>
>
> TR ----R1 -----------------R2 -------TR
> | |
> | |
> E0 FE0
>
>
>R1 and R2 are established as DLSW peers.
>
>I'd like to have NETBIOS propagate across all TR's and E0's. Therefore
>SR/TLB on each router and then I'd like to use DLSW to transport through
>the
>WAN.
>
>I can get it up and running all day ethernet to ethernet and TR to TR.
>Hosts Find each other by browsing the neighborhood or Find Computer, as
>long
>I go E to E (i.e. use dlsw bridge-group 5) or TR to TR ( source-bridge
>ring-group 100).
>
>Once I introduce SR/TLB I'm out of luck. Anyone have an idea of what I
>missing? Is this even feasible?
>
>R1 config
>
>source-bridge ring-group 100
>source-bridge transparent 100 75 1 5
>dlsw local-peer peer-id 137.8.5.1
>dlsw remote-peer 0 tcp 137.8.4.1
>
>!
>interface Loopback0
> ip address 137.8.5.1 255.255.255.0
> no ip directed-broadcast
>!
>interface Ethernet0/0
> ip address 137.8.81.1 255.255.255.0
> no ip directed-broadcast
> bridge-group 5
>!
>!
>interface TokenRing0/0
> ip address 137.8.80.1 255.255.255.0
> no ip directed-broadcast
> ring-speed 16
> source-bridge 2 1 100
> source-bridge spanning
>
>R2 config
>
>source-bridge ring-group 100
>source-bridge transparent 100 75 1 5
>dlsw local-peer peer-id 137.8.4.1
>dlsw remote-peer 0 tcp 137.8.5.1
>!
>interface Loopback0
> ip address 137.8.4.1 255.255.255.0
> no ip directed-broadcast
>!
>interface FastEthernet3/0
> description 100TX lin to Cat5K (3/23)
> ip address 137.8.65.1 255.255.255.0
> no ip directed-broadcast
> no ip mroute-cache
> bridge-group 5
>!
>interface TokenRing5/0
> description 16Mb token-ring to Cat3900 (8)
> ip address 137.8.67.1 255.255.255.0
> no ip directed-broadcast
> no ip mroute-cache
> ring-speed 16
> source-bridge 1 1 100
> source-bridge spanning
>!
>
>Tom Gonter
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:28 GMT-3