From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Thu Jan 11 2001 - 16:51:34 GMT-3
I know that there is ATM in the lab. Just not ATM LANE.
I assume that there is a LS1010 switch somewhere.
Don't get access to the ATM switch in the lab.
The list might be wrong.
Kevin
At 07:23 PM 1/11/01 +0000, Paulo Mendes De Oliveira wrote:
>Excuse my ignorance but according to
><http://www.cisco.com/warp/public/625/ccie/certifications/routing.html#43> ATM
>LANE is no longer in the Lab Exam. Although I can see that only ATM LANE is
>explicitly mentioned I also note from the equipment list that no ATM switch
>(LS1010) is included. Hence whey the ATM questions?
>
>Am I missing something?
>
>TIA
>
>Patrick Bikar wrote:
>
> > Justin,
> >
> > Thanks for the clear answer.
> >
> > Does it acctually mean that configuring SVCs on an LS1010 is simpler than
> > configuring PVCs ?
> >
> > Don't you need to specify the atm-nsap prefix of the switch ?
> >
> > Do you know what is configured by default (ilmi, qsaal, ...) ?
> >
> > Thanks for any hints !
> > Patrick.
> >
> > At 22:09 11/01/2001 +1300, Justin Menga wrote:
> > >Hi,
> > >
> > >All you need to do is start with a default configuration, 'no shut' on the
> > >ATM access ports. You can do SVCs now.
> > >
> > >Then to add a PVC, on either of the PVC interfaces (not both as you do for
> > >frame relay) configure:
> > >
> > >int atm1/0/0
> > > desc Connected to R1
> > > atm pvc 0 100 int atm1/0/1 0 200
> > >
> > >int atm1/0/1
> > > desc COnnected to R2
> > >
> > >R1 ---------- LS1010 --------- R2
> > > (0/100) (0/200)
> > >
> > >
> > >Regards,
> > >
> > >Justin Menga CCIE #6640 MCSE+I CCSE
> > >WAN Specialist
> > >Computerland New Zealand
> > >PO Box 3631, Auckland
> > >DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
> > >mailto: justin.menga@computerland.co.nz
> > >
> > >
> > >
> > >-----Original Message-----
> > >From: Patrick Bikar [mailto:pbikar@cisco.com]
> > >Sent: Thursday, January 11, 2001 9:36 PM
> > >To: ccielab@groupstudy.com
> > >Subject: Simple LS1010 config
> > >
> > >
> > >Hi all !
> > >
> > >Could anyone send me a simple LS1010 config in order to be able to set up
> > >PVCs and SVCs between 2 routers with atm interfaces ? The configs of the
> > >routers are welcome also if possible.
> > >
> > >Thanks !
> > >Patrick.
> > >
> > >
> > >Patrick.
> > >CCNP, Belgium.
> > >Lab:15/03/2001
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:27 GMT-3