From: Connary, Julie Ann (jconnary@xxxxxxxxx)
Date: Thu Jan 11 2001 - 10:57:09 GMT-3
Ronnie,
to test DLSW on put up two workstations with netbeui running and then share
a drive or folder. They must
be in the same windows workgroup for this to work. Then you can use
explorer to see the other workstation and
shared folder.
or - if you have extra routers - I'll post the sna switched services method
again - requires 12.1 code though.
For your solution below use dlsw icanreach for the MAC addresses - then after
the peers are setup look at the capabilities and dlsw reachability cache -
this will put
in a static entry on the other peers reachability cache and hence stop the
explorers.
For number 3 you will need a netbios name filter. Look at recent postings
to this group - lots
of discussion around this one lately.
Julie Ann
At 05:11 PM 1/10/2001 -0600, Ronnie Royston wrote:
>Someone please post the relevant DLSw configs that would meet the criteria
>for the following situations.
>
>ethernet---R1- - - - -R2--token ring
> 1.1.1.1 2.2.2.2
> (loopbacks)
>
>1. Stop R1 from sending explorer packets to R2s ring looking for mac address
>1111.2222.3333.
>
>2. Stop R2 from sending explorer packets to R1a enet looking for mac address
>1111.2222.3333.
>
>3. Stop users on R1s enet from accessing a station on R2s token ring with
>the name HOST.
>
>Each senario is exclusive from the others. Thanks.
>
>**PS Does someone know of a way to test DLSw using either Cisco routers or
>PCs running Windows 98?
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:27 GMT-3