From: Padhu (LFG) (padhu@xxxxxxxxxxxx)
Date: Tue Jan 09 2001 - 14:18:35 GMT-3
Just started some work on NLSP last nite ..so some more silly questions
after reading the
cisco IPX config guides....I have NLSP running on the lan with area xxxxxxxx
, IPX eigrp over frame,remote spoke lan running NLSP xxxx ..(Unfortunately
this version doesn't support Aggregation-Diff problem for another day)....
How do i connect the 2 NLSP areas without redistributing between EIGRP /
NLSP ? any concept similar to virtual links... ?
I can tell u ...IPX addresses ....whoever came up with that scheme had way
too many beers ..
appreciate any insight.
Cheers,Padhu
-----Original Message-----
From: Connary, Julie Ann [mailto:jconnary@cisco.com]
Sent: Tuesday, January 09, 2001 7:26 AM
To: YJC
Cc: CCIE Group Study (E-mail)
Subject: Re: ipx nlsp
YJC,
Reading Caslow it says that "automatic mutual redistribution occurs between
EIGRP and RIP and also between
RIP and NLSP"
Did you enter under ipx router rip, no network 1111 ?
What does your route table look like? ARe you seeing 1111 in your NLSP
database?
Julie Ann
At 05:18 PM 1/9/2001 +0800, YJC wrote:
>hellow all,
>
>I 'm learning ipx nlsp,but i have many question.
>1,how does area-address work?
> I use arae-address 123400 ffffff00,int loop 0 is network 123450
> int loop 1 is network 123460,int loop 2 is network 1111,disable rip
> all of interface, why will nlsp declare route for network 1111.
>
>2, route-aggregation,
> I use route-aggregation in router nlsp,
> and access-list 1200 permit 123400 FFFFFF00,
> why I can't see summary route in routing table.
>who can give me work configration for nlsp.
>
>Thanks
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:25 GMT-3