From: Chuck Church (cchurch@xxxxxxxxxxxx)
Date: Tue Jan 09 2001 - 13:24:43 GMT-3
Julie,
The 'interface' of the SAP refers to the network number that it
facetiously exists on. It is a global command, but it needs to refer to a
network. You can use a connected, physical interface, a loopback, or even
the internal network number. Keep in mind the loopback can't run NLSP
though. Example: (My internal network number is 8989)
C#sh ipx int brie
Interface IPX Network Encapsulation Status IPX
State
Loopback0 6767 UNKNOWN up [up]
C#sh ipx serv
Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP, H - Holddown, + =
detail
U - Per-user static
2 Total IPX Servers
Table ordering is based on routing and server info
Type Name Net Address Port Route Hops
Itf
S 4 TEST-FS 6767.0000.0000.0001:0451 conn 1
Lo0
S 4 TEST2 8989.0000.0000.0001:0451 conn 1
Int
Chuck Church
CCNP, CCDP, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage, NY 10989
845-267-4000 x218
-----Original Message-----
From: Connary, Julie Ann [mailto:jconnary@cisco.com]
Sent: Tuesday, January 09, 2001 8:32 AM
To: ccielab@groupstudy.com
Subject: static sap question -
Ok, I'm just full of them this morning -
Caslow shows how to enter static saps on page 510 - it is a global command:
ipx sap service-type name network.node socket hop-count
Then he says: "With IPX static SAPs, if you place the static sap on the
network that will be propagating the SAPS, it will
not get propagated. You get "null updates suppressed" in the DEBUG IPX SAP
statements.
' in the above example, the SAP needs to be propagated out the s0
interface. If the static SAP is configured on the s0 interface, it will not
work."
If you create static saps in global configuration mode, how do you
configure them on an interface?
Does he mean if S0 is network AAA, then if you define a static SAP for a
file server, say, AAA.0000.0798.9999, then it will
never get propagated out serial 0?
Juli eAnn
------------------------------------------------------------------------
Julie Ann Connary
| | Network Consulting Engineer
||| ||| Federal Support Program
.|||||. .|||||. 13635 Dulles Technology Drive,
Herndon VA 20171
.:|||||||||:.:|||||||||:. Pager: 1-888-642-0551
c i s c o S y s t e m s Email: jconnary@cisco.com
------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:25 GMT-3