From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Mon Jan 08 2001 - 17:27:36 GMT-3
I already verified that. That's not the problem.
Sam
> Have you tried 'no ip route cache' on the BVI
> interface. I ran into a similar problem where
> fast-switching on the BVI was broke in 12.1(4) and
> recent T releases. The first packet went through then
> everything after which was cached didn't go. Cisco TAC
> coudln't dupe the problem and was puzzled.
>
> Anyone know a source for cheap flash for a 800 router?
> I need to upgrade my home router so I can practice
> IPSec. MemoryX wants $200'ish for a 8 meg Kingston
> flash.
>
> --- Sam Munzani <sam@munzani.com> wrote:
> > Hi Group,
> >
> > I just came across a bug that is worth sharing with
> > you fine people out =
> > there.
> >
> > If you apply crypto map to a BVI interface, your
> > IPSEC VPN doesn't work. =
> > The first packet will go through and then it will
> > die.
> >
> > You would love to use BVI in redundant ISP Router
> > environment like =
> > below.
> >
> > ISP Router-1 ISP Router-2
> > | |
> > S/W ------------ S/W
> > | /
> > | /
> > | /
> > | /
> > VPN Router
> > |
> >
> > E0 and E1 of VPN router is connected to those 2
> > switches and creates a =
> > BVI. E2 connects to inside of the network.=20
> >
> > This will not work.
> >
> > Regards,
> >
> > Sam
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:24 GMT-3