From: Atif Awan (atifawan@xxxxxxxxxxx)
Date: Mon Jan 08 2001 - 00:22:50 GMT-3
Thanks .. One more thing .. If you have two routers attached to two 3920
switch ports in different TrCRFs and i have SRB enabled on the TrCRFs and
both of the TrCRFs are in the same TrBRF and on top of that i have DLSw+
connectivity between the two routers also then how will traffic be bridged
between the two token ring interfaces ? I guess spanning tree has to be
enabled and it will prevent the formation of loops but will the DLSW path be
always preferred ?
Regards
Atif Awan
>From: gferro@netstarnetworks.com (Greg Ferro)
>To: "Atif Awan" <atifawan@hotmail.com>
>Subject: Re: Token Ring
>Date: Mon, 08 Jan 2001 10:17:14 +1000
>
>You are correct.
>
>At 11:41 PM 7/01/2001 +0000, you wrote:
>>I am reading up on the Cat 3920 and feel ok with the TrCRF and the TrBRF
>>concepts. However, while i was going through the configuration guidelines
>>for the TrCRF i noticed that they require Ring numbers in Hex while on the
>>routers you configure ring numbers in decimal. If the router is supposed
>>to
>>be in ring 25 then will we enter 0x19 in the TrCRF config menu ?
>>
>>I do not have a 3920 switch to test things out so any help would be
>>appreciated.
>>
>>Regards
>>Atif
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:23 GMT-3