From: Randy Feliz (rjfeliz@xxxxxxxxx)
Date: Sat Jan 06 2001 - 09:20:43 GMT-3
are you using unix or NT...it works with both but you configure it
differently on them
first of all make sure that on the router you have something close to the
following
aaa authentication ppp
aaa authorization network radius
then on the acs
you create a user that has the following attributes
framed user
framed type ppp
frame ip address(x.x.x.x)
or you could define a pool and have the users address assigned from the pool
Randy Feliz
Senior Network Engineer
CCIE# 4331
----- Original Message -----
From: steve@ntl <steve.munro@ntlworld.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, December 17, 2000 3:17 PM
Subject: Ciscosecure
> Has anybody used the acs software to assign static ip addresses via =
> radius. I am experimenting with radius to try assigning attributes =
> instead of just authentication but cannot get any other parameters =
> passed to the client.
>
> thanks in advance
>
> Steve
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:23 GMT-3