From: Padhu (LFG) (padhu@xxxxxxxxxxxx)
Date: Wed Jan 03 2001 - 14:04:47 GMT-3
I would think probably R2 needs a link to area 0 ..now if R2 (being an ABR)
should
convert these N2 routes learnt from R1 and send it to R3 as E2...
-----Original Message-----
From: Ronnie Royston [mailto:RonnieR@globaldatasys.com]
Sent: Wednesday, January 03, 2001 10:44 AM
To: ccielab@groupstudy.com
Subject: OSPF - nssa
I have:
R1--------enet--------R2-----serial hdlc--------R3
area 5 area 3
R1 is redistributing a connected network into OSPF (redis connected). Area
5 is a nssa where R2 is telling R1 a default route. R2 sees the
redistributed network from R1 but does not pass it on to R3. How can I get
R3 to see the network?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:22 GMT-3