From: Johnny Gorham (jgorham@xxxxxxxxx)
Date: Wed Jan 03 2001 - 11:40:32 GMT-3
I did something very similar on yesterday and reload of all routers was my
friend.
Vijay Venkatesh wrote:
> Yes yes I have all this setup fine. When I do a sh ip ospf data on r8
> the network 150.150.100.0/24 shows as a summary as lsa 5. But it does
> not put this into the routing routing table. r6 sees this network fine
> with a /32. Debugs are useless and not really informative. The virt
> link is up and I see all routes on r8 except for this one network.
> ANy thoughts ?
> Vijay
>
> ChrisH wrote:
> >
> > OSPF area 100 and 20 connect directly to Area 0. Area 10 needs to go throug
h
> > Area 100 to get to Area 0. Therefore, you should have a statements that
> > looks like:
> >
> > R6:
> > area 100 virtual-link x.x.x.x( R1's RID)
> >
> > R1:
> > area 100 virtual-link y.y.y.y (R6's RID)
> >
> > In R3, I assume that you have something that looks like:
> >
> > router ospf 100
> > network 150.150.100.1 0.0.0.0 area 20
> >
> > I am not aware of any IOS bugs related to this issue.
> >
> > Chris
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Vijay Venkatesh
> > Sent: Tuesday, January 02, 2001 9:08 PM
> > To: ccielab@groupstudy.com
> > Subject: OSPF virtual-link question
> >
> > Here is the situation
> >
> > r8 ---- r6 ------r1----r3 ---- network 150.150.100.1/24 (loop 0)
> >
> > Between r1 and r3 is area 0
> > between r6 and r1 is area 100
> > between r8 and r6 is area 10
> > r3's loop 0 is in area 20
> >
> > area 100 has a ospf virt link between r6 and r1
> > The ospf virt link is up
> >
> > The problem
> > -----------
> > r3's loop0 is 150.150.100.1/24 and is in area 20. I can every network
> > on r8 except for the 150.150.100.1 network. What is the problem ? Is
> > there something special when sending loopbacks across virtual links ?
> > Is this an IOS issue ?
> >
> > Router versions
> > ---------------
> > all routers are running 11.2.19 IOS
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:21 GMT-3