From: Nigel Taylor (nigel_taylor@xxxxxxxxxxx)
Date: Mon Jan 01 2001 - 20:41:39 GMT-3
Chris,
I got the cables I needed for my AGS+ (frame cloud) at
http://www.pacificcable.com/
now these cables come at a premium price. The HD 26, V.35 DCE/DTE to the
HD 60(2500)DCE/DTE goes for about $42. I think they also have the ones for
the RS-232
as well. I think the RS 232 type cables do however limit you to async type
speeds of 115200 max
compared to the High density V.35's 4-8MBits. Another thing to note is on
the AGS+, the MCI/SCI
card itself allow you to hardware set the serial ports to DCE or DTE, DTE
being the default...
Here's a link...
http://www.cisco.com/univercd/cc/td/doc/product/core/cisagspl/agscfig/34084.
htm
HTH
Nigel..
----- Original Message -----
From: ChrisH <chrish@bjen.com>
Cc: <ccielab@groupstudy.com>
Sent: Monday, January 01, 2001 4:32 PM
Subject: RE: Back-to-back cable to connect AGS+ to 2500
>
> I also have an AGS+ and two of the four
> ports are DB25 (2-row)femals DCE. the other two ports are DTE, 3-row DB26.
> What kind of back-to-back cables can I use to connect the DB-25 ports to
> 2500? Where can I get them?
>
> From whay I read these DB25 ports are RS-232 and not V.35. Is it possible
to
> get a crossover cable?
>
> Thanks!
>
> Chris
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:20 GMT-3