From: Chuck Larrieu (chuck@xxxxxxxxxxxxx)
Date: Fri Dec 29 2000 - 18:04:28 GMT-3
Point-to-point is the only allowed ospf network type on loopbacks.
12.1.something
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Miguel.Ciena@mail.sprint.com
Sent: Friday, December 29, 2000 12:53 PM
To: ccielab@groupstudy.com; harbirk@sympatico.ca
Subject: RE: OSPF and loopback
if you are running 12.0 or later under your loopback change the network
type to multipoint...that will do it.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Harbir Kohli
Sent: Friday, December 29, 2000 3:29 PM
To: ccielab@groupstudy.com
Subject: OSPF and loopback
Hello all,
A while ago I saw someone talk about how you can change the loopback
advertisement in OSPF from /32 to another value.
Could someone repost that ?
I tried to check the archive but no success due to the number of posts
on OSPF and I can not create the right query.
Thanks
harbir
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:13 GMT-3