From: Lye Beng, Ong (long@xxxxxxxxxx)
Date: Fri Dec 29 2000 - 11:16:06 GMT-3
Hi Group,
I accidentally turn of bridging on the bridge segment.
bridge irb
bridge 1 protocol ieee
bridge 1 route ip
no bridge 1 bridge ip <--- that is the reason the w/s cannot ping the
bvi intf from the bridge segment.
Thanks for the help.
Regards,
-- LB
Thursday, December 28, 2000, 4:10:43 PM, you wrote:
LBO> Hi all,
LBO> I am trying to configure IRB. I have a NT workstation connected to the
LBO> bridge interface (e2/2). The workstation ip address is 12.0.0.5/8.
LBO> When I try to ping from the router to the w/s I got the following
LBO> error (deb arp). I can see that the icmp packet reach the w/s and the
LBO> w/s tries to arp for the ip address 12.0.0.1, but it never got any
LBO> reply.
LBO> What should be the w/s default gateway setting ?
LBO> Plese help. Thanks.
LBO> Regards,
LBO> -- LB
LBO> 3w0d: IP ARP: creating incomplete entry for IP address: 12.0.0.5 interface
BVI1
LBO> 3w0d: IP ARP: sent req src 12.0.0.1 0030.94a3.aea2,
LBO> dst 12.0.0.5 0000.0000.0000 BVI1
LBO> 3w0d: IP ARP rep filtered src 12.0.0.5 00c0.4f60.3d20, dst 12.0.0.1 0030.9
4a3.aea2 wrong cable, interface Ethernet2/2.
LBO> 3w0d: IP ARP: sent req src 12.0.0.1 0030.94a3.aea2,
LBO> dst 12.0.0.5 0000.0000.0000 BVI1
LBO> below is my partial configuration. I am running 12.0(7)T.
LBO> bridge irb
LBO> interface Ethernet2/0
LBO> ip address 10.0.0.1 255.0.0.0
LBO> no ip directed-broadcast
LBO> no keepalive
LBO> !
LBO> interface Ethernet2/1
LBO> ip address 11.0.0.1 255.0.0.0
LBO> no ip directed-broadcast
LBO> no keepalive
LBO> !
LBO> interface Ethernet2/2
LBO> no ip address
LBO> ip directed-broadcast
LBO> no ip route-cache
LBO> no ip mroute-cache
LBO> bridge-group 1
LBO> interface BVI1
LBO> ip address 12.0.0.1 255.0.0.0
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:13 GMT-3