From: Thomas Alexander (talexander1@xxxxxxxxxxxxx)
Date: Thu Dec 28 2000 - 22:14:34 GMT-3
Use attribute-map instead of route-map
aggregate-address a.b.c.d x.x.x.x attribute-map <route-map>
Regds/ Tom
----- Original Message -----
From: Jobson, Ed <ejobson@thrupoint.net>
To: <ccielab@groupstudy.com>
Sent: Thursday, December 28, 2000 11:14 PM
Subject: BGP route map
> A question on BGP.
>
> Scenario
>
> Ext BGP
>
AS---------------------R4-----------EBGP-----------------R3--------IBGP-----
> ----------R2-----EBGP-------------R5
>
> I have configured the command aggregate-address a.b.c.d 255.255.0.0
> route-map bgpsummary on R4, but the route-map bgpsummary won't allow me to
> do what I want. I want to tag this summarised route leaving R4 and match
it
> when it arrives on R5 leaving the more specific non-summarised routes
> advertised to R3 & R2 en route. But IOS gives me errors when trying to set
a
> tag or as-path tag on R4.
>
> Any ideas if this is the right way to go about it?
>
> Thanks.
>
> Eddie Jobson
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:12 GMT-3