From: Connary, Julie Ann (jconnary@xxxxxxxxx)
Date: Thu Dec 28 2000 - 16:50:40 GMT-3
Since each loopback interface will be a host route, use 4 network
statements like:
network 192.168.20.2 0.0.0.0 area X
Julie Ann
At 11:17 AM 12/28/2000 -0800, fwells12 wrote:
>I have the following IP addresses configured as loopback interfaces on =
>an OSPF router. What is the correct command to insert these networks =
>into the OSPF process in the most efficient manner? By that, I mean =
>conserving the maximum amount of IP addresses.
>
>interface Loopback0
> ip address 192.168.20.2 255.255.248.0
>!
>interface Loopback1
> ip address 192.168.28.2 255.255.248.0
>!
>interface Loopback2
> ip address 192.168.36.2 255.255.248.0
>!
>interface Loopback3
> ip address 192.168.44.2 255.255.248.0=20
>
>Cheers.
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:11 GMT-3