From: Connary, Julie Ann (jconnary@xxxxxxxxx)
Date: Wed Dec 27 2000 - 17:20:28 GMT-3
Hi
These are not loopbacks,
they are frame-relay point-to-multipoint interfaces.
Julie ann
At 12:07 PM 12/27/2000 -0800, Chuck Larrieu wrote:
>On the particular interface ( loopback? ) ip ospf network point-to-point
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Connary, Julie Ann
>Sent: Wednesday, December 27, 2000 12:01 PM
>To: ccielab@groupstudy.com
>Subject: ospf point-to-multipoint networks and the /32 route
>
>Hi all,
>
>how do you get ospf to not advertise a /32 network for a
>point-to-multipoint network. In the
>ospf database on another router when I issue "show ip ospf database router"
>I see the following:
>
>Link connected to: a Stub Network
> (Link ID) Network/subnet number: 150.100.32.2
> (Link Data) Network Mask: 255.255.255.255
> Number of TOS metrics: 0
> TOS 0 Metrics: 0
>
>Why does ospf see the point-to-multipoint frame-relay network as a stub?
>
>Thanks in advance,
>
>Julie Ann
>------------------------------------------------------------------------
> Julie Ann Connary
> | | Network Consulting Engineer
> ||| ||| Federal Support Program
> .|||||. .|||||. 13635 Dulles Technology Drive,
>Herndon VA 20171
> .:|||||||||:.:|||||||||:. Pager: 1-888-642-0551
> c i s c o S y s t e m s Email: jconnary@cisco.com
>
>------------------------------------------------------------------------
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:11 GMT-3