From: Chuck Larrieu (chuck@xxxxxxxxxxxxx)
Date: Wed Dec 27 2000 - 15:03:29 GMT-3
>> This is a well known IOS bug.<<
how can something be called a bug, if it apparently cannot be fixed in any
IOS version? And has been around forever and continues to be around?
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kevin Baumgartner
Sent: Wednesday, December 27, 2000 9:53 AM
To: Curtis Phillips; ccielab@groupstudy.com
Subject: Re: Changing subinterface link types...
Actually the only way is to do a "no interface subinterface", save and
reload the router.
Then after reboot you will be able to create the subinterface again with a
different link type.
If you don't do this method and just delete the interface and recreate
using a different link
type it won't work and will complain.
This is a well known IOS bug.
Kevin
At 12:39 PM 12/27/00 -0500, Curtis Phillips wrote:
>Hello,
>
>What is the method of changing subinterface link types on serial
interfaces?
>
>For instance, if you configured point-to-point and wanted to alter it to
>multipoint, there is a real reluctance on the part of the interface to
allow
>you to this.
>
>Thanks,
>
>Curtis
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:11 GMT-3