From: Bespalov Oleg (OBespalov@xxxxxxx)
Date: Wed Dec 27 2000 - 12:39:46 GMT-3
Hi!
>From deny any any log i got:
01:31:44: %SEC-6-IPACCESSLOGP: list 101 denied udp 137.1.3.130(0) ->
137.1.4.65(2067), 45
packets
Do it have UDP 2067 or TCP 2067 and what this udp port do?
Or should i open both udp 2067 and tcp 2067?
Regards,
Oleg Bespalov
> -----Original Message-----
> From: zheng jiang gu [mailto:zjgu@ce-air.com]
> Sent: Monday, December 18, 2000 6:19 AM
> To: Fred Ingham; Bill Young; ccielab@groupstudy.com
> Subject: Re: allowing DLSW through an access-list
>
>
> Sorry Fred
> But DLSW V2 use TCP 2065/2067,correct me if wrong!!
> ----- Original Message -----
> From: Fred Ingham <fningham@worldnet.att.net>
> To: Bill Young <byoung@cox.rr.com>; <ccielab@groupstudy.com>
> Sent: Monday, December 18, 2000 3:34 AM
> Subject: Re: allowing DLSW through an access-list
>
>
> > The replies so far state the correct ports:tcp 2065, and, if
> > prioritization is configured, 1981,1982, and 1983. DLSW v2
> can also use
> > UDP 2065/2067.
> >
> > Best way to discover needed ports is to insert a "deny any any log"
> > statement at the end of your access-list and see the
> rejected packets.
> > Pick up the needed ports from the log messages.
> >
> > Cheers, Fred.
> >
> > Bill Young wrote:
> > >
> > > All,
> > >
> > > Anyone know what the required ACL port(s) for DLSW are?
> I have been =
> > > working on a lab all morning and couldn't figure out why
> my DLSW was =
> > > failing. As I was cutting and pasting the configs into
> an email for you =
> > > all, I saw the ip access-group statement. As soon as I
> removed it, DLSW =
> > > started working (DUH!)
> > >
> > > I can't seem to find the port numbers for DLSW though.
> Does anyone have =
> > > this?
> > >
> > > Thanks,
> > > Bill
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:11 GMT-3