From: D. J. Jones (meganac@xxxxxxxx)
Date: Sat Dec 23 2000 - 16:04:58 GMT-3
Looks like a nice feature. One restriction according to the documentation
is that only Basic-net3 and basic-qsig are the only ISDN switch types
currently support for an NT interface. I know that basic-net3 is for use in
the UK and Europe. Unclear about basic-qsig. Also not sure if it works for
data apps either.
..dj
----- Original Message -----
From: "James Wilson" <jamewils@cisco.com>
To: "Kurt E. Radecki" <kradecki@cisco.com>
Cc: <ccielab@groupstudy.com>
Sent: Friday, December 22, 2000 4:41 PM
Subject: Re: ISDN simulator -- IOS Alternative
> Guys,
>
> In IOS 12.1T onwards there is a command called 'isdn protocol emulate
> [network|user]'.
>
> I know this works for PRI's on a 5300 which enables you to do back to
back.
> I have only ever tried it with Voice traffic so your mileage may vary with
> data.
>
> Cheers.
>
> At 08:09 AM 12/20/2000 -0500, Kurt E. Radecki wrote:
> >Isn't there a relatively inexpensive ISDN simulator on the market today?
> >Thanks.
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:10 GMT-3