From: D. J. Jones (meganac@xxxxxxxx)
Date: Thu Dec 21 2000 - 14:07:06 GMT-3
I'm looking at the Cisco documentation now and it shows that:
Note: Route redistribution is enabled automatically between IPX RIP and
Enhanced IGRP(1) and between IPX RIP and NLSP.(2)
Here are the links:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1908.htm
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/n
p2_c/2cipx.htm
..dj
----- Original Message -----
From: "Roderick Ta" <rta@nortelnetworks.com>
To: "Thounda Craig Jr." <hjcgroup@mindspring.com>; "Philippe Rossignol"
<philippe.rossignol@club-internet.fr>; "Robert DeVito"
<robertdevito@hotmail.com>; "robbarto" <robbarto@cisco.com>; "ccielab"
<ccielab@groupstudy.com>
Sent: Thursday, December 21, 2000 8:15 AM
Subject: RE: nlsp redistribution
> IPX EIGRP & RIP 'DO' automatically redistribute. EIGRP &
> IGRP also automatically redistribute if same AS#. For NLSP
> and RIP, you do need to manually redistribute.
>
> Roderick Ta
> Senior Engineer - Internetworking Services
> Dimension Enterprises, Inc., a Nortel Networks, GPS IDC/ASP Group
> E-mail: rta@nortelnetworks.com / rta@dimension.net
>
> -----Original Message-----
> From: Thounda Craig Jr. [mailto:hjcgroup@mindspring.com]
> Sent: Thursday, December 21, 2000 11:08 AM
> To: Philippe Rossignol; Robert DeVito; robbarto; ccielab
> Subject: Re: nlsp redistribution
>
>
> EIGRP & RIP doesn't automatically perform "two-way" redistribution.
> I think you're referring to EIGRP & IGRP running the same AS #.
>
> I can understand how easily one can get confused; alot to remember!
> (research on CCO)
>
> ----- Original Message -----
> From: "Philippe Rossignol" <philippe.rossignol@club-internet.fr>
> To: "Robert DeVito" <robertdevito@hotmail.com>; <robbarto@cisco.com>;
> <ccielab@groupstudy.com>
> Sent: Thursday, December 21, 2000 10:56 AM
> Subject: Re: nlsp redistribution
>
>
> > I'm not agree with you. The redistribution Between NLSP and RIPX is
> > automatic.
> >
> > Philippe
> >
> > ----- Original Message -----
> > From: "Robert DeVito" <robertdevito@hotmail.com>
> > To: <robbarto@cisco.com>; <ccielab@groupstudy.com>
> > Sent: Thursday, December 21, 2000 3:02 PM
> > Subject: Re: nlsp redistribution
> >
> >
> > > NLSP does not redistribute automatically like EIGRP and RIP do. You
have
> > to
> > > manually redistribute RIP into NLSP and NLSP into RIP.
> > >
> > > Hope this helps,
> > > Robert
> > >
> > >
> > >
> > > ----Original Message Follows----
> > > From: "Rob Barton" <robbarto@cisco.com>
> > > Reply-To: "Rob Barton" <robbarto@cisco.com>
> > > To: "Ccielab" <ccielab@groupstudy.com>
> > > Subject: nlsp redistribution
> > > Date: Wed, 20 Dec 2000 18:16:45 -0800
> > >
> > > Has anybody had any success with redistribution of RIP into NLSP in
IPX?
> > My
> > > distribute lists don't seem to be working. Any ideas?
> > >
> > >
> > > hostname r1
> > > !
> > > ipx routing 0000.0000.0002
> > > ipx internal-network 2000
> > > !
> > > interface Ethernet0/0
> > > ipx network 500
> > > !
> > > interface Serial0/0
> > > ipx network 200
> > > ipx nlsp enable
> > > !
> > > access-list 800 deny 666
> > > access-list 800 permit FFFFFFFF
> > > access-list 850 deny 4700
> > > access-list 850 permit FFFFFFFF
> > > !
> > > ipx router nlsp
> > > area-address 1999 FFFFFFFF
> > > distribute-list 800 out rip
> > > !
> > > ipx router rip
> > > distribute-list 850 out nlsp
> > > no network 200
> > >
> > >
> > >
> > >
> > > Thanks, Rob.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:09 GMT-3