From: Robert DeVito (robertdevito@xxxxxxxxxxx)
Date: Thu Dec 21 2000 - 16:01:08 GMT-3
Ooops you are right... NLSP and EIGRP is not automatic....
----Original Message Follows----
From: "Philippe Rossignol" <philippe.rossignol@club-internet.fr>
To: "Robert DeVito" <robertdevito@hotmail.com>, <robbarto@cisco.com>,
<ccielab@groupstudy.com>
Subject: Re: nlsp redistribution
Date: Thu, 21 Dec 2000 16:56:28 +0100
I'm not agree with you. The redistribution Between NLSP and RIPX is
automatic.
Philippe
----- Original Message -----
From: "Robert DeVito" <robertdevito@hotmail.com>
To: <robbarto@cisco.com>; <ccielab@groupstudy.com>
Sent: Thursday, December 21, 2000 3:02 PM
Subject: Re: nlsp redistribution
> NLSP does not redistribute automatically like EIGRP and RIP do. You have
to
> manually redistribute RIP into NLSP and NLSP into RIP.
>
> Hope this helps,
> Robert
>
>
>
> ----Original Message Follows----
> From: "Rob Barton" <robbarto@cisco.com>
> Reply-To: "Rob Barton" <robbarto@cisco.com>
> To: "Ccielab" <ccielab@groupstudy.com>
> Subject: nlsp redistribution
> Date: Wed, 20 Dec 2000 18:16:45 -0800
>
> Has anybody had any success with redistribution of RIP into NLSP in IPX?
My
> distribute lists don't seem to be working. Any ideas?
>
>
> hostname r1
> !
> ipx routing 0000.0000.0002
> ipx internal-network 2000
> !
> interface Ethernet0/0
> ipx network 500
> !
> interface Serial0/0
> ipx network 200
> ipx nlsp enable
> !
> access-list 800 deny 666
> access-list 800 permit FFFFFFFF
> access-list 850 deny 4700
> access-list 850 permit FFFFFFFF
> !
> ipx router nlsp
> area-address 1999 FFFFFFFF
> distribute-list 800 out rip
> !
> ipx router rip
> distribute-list 850 out nlsp
> no network 200
>
>
>
>
> Thanks, Rob.
>
>
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:09 GMT-3