From: YJC (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Thu Dec 21 2000 - 02:54:23 GMT-3
dialer watch can't work with rip,pls use eigrp or igrp try it.
----- Original Message -----
From: Michelle T <mtruman@mn.mediaone.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, December 20, 2000 11:14 PM
Subject: Dialer Profiles with Dialer Watch Groups?
> All, I have a problem with Dialer Profiles. I have been using them fine =
> this morning to perform dial backup and everything is working. =
> Authentication, call setup, multilink, etc. Now, I followed the Cisco =
> examples to set up a watch group. I am looking for network 2.0.0.0 =
> 255.0.0.0. I advertised it from R1 (Which R2 will hear on Serial0). R2 =
> sees the route fine. Then I block the route via distribute list (instead =
> of continuously bring the serial link up and down). The route disappers =
> from the table, but R2 never calls R3. ie. It seems the Dialer =
> Watch-group never kicks in. Topology looks like this:
>
>
> R2 ---- Bri0 (Di0) ----- R3
> |
> S0
> |
> R1
> net 2.0.0.0 255.0.0.0
>
>
> R2#s
> Building configuration...
>
> Current configuration:
> !
> version 11.3
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R2
> !
> aaa new-model
> aaa authentication ppp default local
> enable password cisco
> !
> username R3 password 0 cisco
> no ip domain-lookup
> isdn switch-type basic-ni
> !
> !
> !
> process-max-time 200
> !
> interface Loopback0
> ip address 10.1.0.2 255.255.255.255
> !
> interface Loopback1
> no ip address
> !
> interface Loopback2
> no ip address
> !
> interface Ethernet0
> ip address 30.1.4.1 255.255.255.0
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0
> ip address 30.1.1.2 255.255.255.0
> no ip mroute-cache
> custom-queue-list 1
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface BRI0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0835866101 8358661
> isdn spid2 0835866301 8358663
> !
> interface Dialer0
> ip address 30.1.32.2 255.255.255.0
> encapsulation ppp
> bandwidth 48
> dialer remote-name R3
> dialer idle-timeout 300
> dialer string 8358662
> dialer load-threshold 50 either
> dialer pool 1
> dialer watch-group 2
> dialer-group 1
> ppp authentication chap
> ppp multilink
> !
> router rip
> version 2
> network 10.0.0.0
> network 30.0.0.0
> distribute-list 15 in Serial0
> no auto-summary
> !
> ip classless
> !
> access-list 15 deny 2.0.0.0 0.255.255.255
> access-list 15 permit any log
> access-list 101 permit tcp any any eq www
> access-list 102 permit tcp any any eq smtp
> access-list 110 deny udp any eq rip any eq rip log
> access-list 110 permit ip any any
> queue-list 1 protocol ip 1 list 101
> queue-list 1 protocol ip 2 list 102
> queue-list 1 default 3
> queue-list 1 queue 1 byte-count 2000
> queue-list 1 queue 2 byte-count 1000
> queue-list 1 queue 3 byte-count 1000
> dialer watch-list 2 ip 2.0.0.0 255.0.0.0
> dialer-list 1 protocol ip list 110
> !
> alias exec s sho run
> alias exec i sho ip route
> !
> line con 0
> line aux 0
> line vty 0 4
> password cisco
> !
> end
> R3#s
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R3
> !
> aaa new-model
> aaa authentication ppp default local
> enable password cisco
> !
> username R2 password 0 cisco
> ip subnet-zero
> no ip domain-lookup
> appletalk routing
> isdn switch-type basic-ni
> !
> !
> !
> !
> !
> interface Loopback10
> ip address 10.1.0.3 255.255.255.255
> no ip directed-broadcast
> !
> interface Serial0
> ip address 30.1.2.2 255.255.255.0
> no ip directed-broadcast
> no ip mroute-cache
> no fair-queue
> traffic-shape group 101 16000 32000 32000 1000
> !
> interface Serial1
> no ip address
> no ip directed-broadcast
> clockrate 56000
> !
> interface TokenRing0
> ip address 30.1.5.1 255.255.255.0
> no ip directed-broadcast
> ring-speed 16
> !
> interface BRI0
> bandwidth 48
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0835866201 8358662
> isdn spid2 0835866401 8358664
> !
> interface Dialer0
> ip address 30.1.32.3 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer remote-name R2
> dialer idle-timeout 300
> dialer string 8358661
> dialer pool 1
> dialer-group 1
> pulse-time 0
> ppp authentication chap
> ppp multilink
> !
> router rip
> version 2
> network 30.0.0.0
> no auto-summary
> !
> no ip classless
> !
> access-list 101 permit tcp any any eq telnet
> dialer-list 1 protocol ip deny
> !
> alias exec i sho ip route
> alias exec s sho run
> alias exec on sho ip ospf nei
> alias exec b sh ip bgp
> alias exec cb clea ip bgp *
> alias exec oi sh ip ospf int
> alias exec a sh apple route
> alias exec x sh ipx route
> !
> line con 0
> transport input none
> line aux 0
> line vty 0 4
> password cisco
> !
> end
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:09 GMT-3