From: jaythomp (jaythomp@xxxxxxxxx)
Date: Wed Dec 20 2000 - 18:04:01 GMT-3
Most of the labs use Teltones for small setups and use Adtrans for the
larger simulations.
Jay...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Andrew G. Mason
Sent: Wednesday, December 20, 2000 7:57 AM
To: ChrisH; Kurt E. Radecki; ccielab@groupstudy.com
Subject: RE: ISDN simulator
I use the Elmeg C88m from www.elmeg.com. It cost me around £600 ($840) new
and
is upgradeable to 11*S0. The basic model has 3*S0 and it also operates as a
PABX with analogue ports included, ideal for async routing/FXO VoIP
connections etc..
This uses the Basic-NET3 switch type as it is European.
It is a super piece of kit, works fine in my Cisco lab.
Hope this helps.
Andrew..
>===== Original Message From "ChrisH" <chrish@bjen.com> =====
>the least expensive one that I have found is from Merge Technologies. It
>still costs ~$1800
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Kurt E. Radecki
>Sent: Wednesday, December 20, 2000 8:10 AM
>To: ccielab@groupstudy.com
>Subject: ISDN simulator
>
>
>Isn't there a relatively inexpensive ISDN simulator on the market today?
>Thanks.
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:08 GMT-3