From: McCallum, Robert (Robert.McCallum@xxxxxxxxxxxxxxxxxx)
Date: Mon Dec 18 2000 - 11:39:59 GMT-3
shouldn't you be matching the incoming route? rather than metric. you would
then change the metric.
here is an example.
route-map test permit 10
match ip route 1 <- this is an access list number
set metric +20 <- add 20 to the metric of the routes found in access list 1
access-list 1
permit blah blah blah
-----Original Message-----
From: Burgstaller, Oliver [mailto:BurgstallerO@messe-duesseldorf.de]
Sent: 18 December 2000 14:31
To: 'McCallum, Robert'
Subject: AW: Change Metric
when i use a route map like
int s0
ip policy route-map TEST
route-map TEST permit 10
match metric xxx
set metric 64 ..... (use for IGRP)
i think only works when you redistibute routes
-----Ursprüngliche Nachricht-----
Von: McCallum, Robert [mailto:Robert.McCallum@let-it-be-thus.com]
Gesendet am: Montag, 18. Dezember 2000 15:21
An: 'Burgstaller, Oliver'
Betreff: RE: Change Metric
use a route-map
-----Original Message-----
From: Burgstaller, Oliver [mailto:BurgstallerO@messe-duesseldorf.de]
Sent: 18 December 2000 14:10
To: 'ccielab@groupstudy.com'
Subject: Change Metric
How do I change the metric of a igrp incoming route. I only whant to change
one route not all incoming routes
Mit freundlichen Gruessen / With kind regards
Dipl.-Ing. O. Burgstaller
Messe Duesseldorf GmbH
Dezentrale Systeme G3-D
Stockumer Kirchstr. 61
D-40474 Duesseldorf
Voice: +49-211-4560-304
Fax: +49-211-4560-87304
e-Mail: BurgstallerO@messe-duesseldorf.de
Visit us on the Web: www.messe-duesseldorf.de
International: www.messe-duesseldorf.com
<<Burgstaller, Oliver Dirk (E-Mail).vcf>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:04 GMT-3