From: Arthayuth.B@xxxxxxxxxxxxxxxxxx
Date: Mon Dec 18 2000 - 08:08:20 GMT-3
could you sent command for R1 and R2?
=======================================================
Arthayuth Boonruengrod
Network Consultant
CIP, CCNA, CCDA
Datacraft (Thailand) Ltd.
*14th Floor, Lake Rajada Building, Ratchadaphisek Road, Khlong-Toey, Bangkok
10110
* arthayuth.b@datacraft-asia.com http:\\www.datacraft-asia.com
* (662)264-0400, 661-9368 Ext# 104 Fax: (662)264-0405, 661-9488 *
(661)684-8548
=======================================================
> -----ข้อความต้นฉบับ-----
> จาก: Lykourgiotis Paraskevas [SMTP:ParaskevasL@pcsystems.gr]
> ส่งเมื่อ: 18 ธันวาคม 2543 17:58
> ถึง: ccielab@groupstudy.com
> เรื่อง: OSPF NSSA Question
>
> Hello Everybody.
>
> I have a problem with OSPF NSSA areas.
> Please consider the following scenario:
>
> R1----LAN----R2----LAN----R3.
>
> All three routers run OSPF.
> I have set up the network bettween R1 and R2 as area 1 and configured it
> as
> an NSSA area.
> The network between R2 and R3 has been configured as area 0.
> On R1, I have created a loopback interface and I redistr connected subnets
> into the OSPF process.
> The problem is that although R2 does learn about this subnet, R3 doesn't.
> Any idea?
> Thanks in advance.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:04 GMT-3