From: zheng jiang gu (zjgu@xxxxxxxxxx)
Date: Mon Dec 18 2000 - 07:11:27 GMT-3
dlsw icanreach netbios-name <service name>
dlsw icanreach netbios-exclusive
----- Original Message -----
From: Ronnie Royston <RonnieR@globaldatasys.com>
To: 'zheng jiang gu' <zjgu@ce-air.com>
Sent: Monday, December 18, 2000 11:16 AM
Subject: RE: NETBIOS Filtering by Letter Pattern
> Do you know how to configure this? If so, please let me know.
>
> -----Original Message-----
> From: zheng jiang gu [mailto:zjgu@ce-air.com]
> Sent: Sunday, December 17, 2000 7:10 PM
> To: Ronnie Royston; ccielab@groupstudy.com
> Subject: Re: NETBIOS Filtering by Letter Pattern
>
>
> No ,It is said the user on bridge can access CISCO station only.
> ----- Original Message -----
> From: Ronnie Royston <RonnieR@globaldatasys.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, December 18, 2000 9:38 AM
> Subject: NETBIOS Filtering by Letter Pattern
>
>
> > Will the below config allow the router to only allow NETBIOS names that
> > contain the letters CISCO to be advertised to its peer?
> >
> >
> > netbios access-list host CISCO_PERMIT permit CISCO
> > !
> > ip subnet-zero
> > no ip domain-lookup
> > !
> > bridge crb
> > !
> > source-bridge ring-group 111
> > dlsw local-peer peer-id 172.17.59.65
> > dlsw remote-peer 0 tcp 172.17.59.97 host-netbios-out CISCO_PERMIT
> > dlsw bridge-group 11
> > !
> > !
> > interface Ethernet0
> > ip address 172.17.59.65 255.255.255.240
> > no ip directed-broadcast
> > media-type 10BaseT
> > bridge-group 11
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:04 GMT-3