From: Distel, David M. (david.distel@xxxxxxxxxx)
Date: Fri Dec 15 2000 - 12:06:05 GMT-3
I am having problems posting this to the Cisco list on "Spot" , so I thought
I would post it here on the Group Study as well.
Thanks , David
> Would someone be able to explain why the portfast setting is enabled for
> port 15/1 when I do a show spantree [ vlan ] and when I do a show port
> spantree [port] ,portfast shows as disabled for that port 15/1 and vlan 10
>
> labtest> (enable) sh port spant 15/1 ( Spantree for the port )
>
> Port(s) Vlan Port-State Cost Priority Portfast
> Channel_id
> ------------------------ ---- ------------- ----- -------- ----------
> ----------
> 15/1 1 not-connected 4 32 disabled 0
>
> 15/1 10 forwarding 4 32 disabled 0
>
> 15/1 20 forwarding 4 32 disabled
> 0
> 15/1 600 forwarding 4 32 disabled 0
>
> 15/1 601 forwarding 4 32 disabled 0
>
> 15/1 602 forwarding 4 32 disabled 0
>
>
> labtest> (enable) sh spant 10 ( Spantree for the Vlan 10 )
> VLAN 10
> Spanning tree enabled
> Spanning tree type ieee
>
> Designated Root 00-d0-00-a8-e4-09
> Designated Root Priority 32768
> Designated Root Cost 8
> Designated Root Port 1/2
> Root Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec
>
> Bridge ID MAC ADDR 00-d0-00-bd-9c-09
> Bridge ID Priority 32768
> Bridge Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec
>
> Port Vlan Port-State Cost Priority Portfast
> Channel_id
> ------------------------ ---- ------------- ----- -------- ----------
> ----------
> 1/2 10 forwarding 4 32 disabled 0
>
> 15/1 10 forwarding 4 32 enabled 0
>
> 16/1 10 forwarding 4 32 enabled 0
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:02 GMT-3