From: Tony Medeiros (tonygreat@xxxxxxxx)
Date: Tue Dec 12 2000 - 05:02:29 GMT-3
As far as I can remember Justin, You don't have to set up VTP on the 3920
to create vlans like you do on the other catalyst switches. The only time I
ever got my hands on those funky switches was at ASET and on the lab itself
and I didn't bother with VTP on the 3920 either time.
Tony
CCIE #6172
----- Original Message -----
From: "Justin Menga" <Justin.Menga@computerland.co.nz>
To: <ccielab@groupstudy.com>
Sent: Monday, December 11, 2000 10:27 PM
Subject: Cat 3920
> Hi,
>
> Unfortunately I don't have a Cat 39xx to play with, but I do have a Cat5K
> with a Token Ring Module (you would think they could have put this in the
> lab instead - ever heard of integration??)
>
> I notice with the Cat5 you need to set you VTP version to 2 (set vtp v2
> enable) to allow the Token Ring Module to actually start
> switching/source-route bridging.
>
> Is this also true with the Cat 3920?
>
> Regards,
>
> Justin Menga MCSE+I CCNP CCSE ASE
> WAN Specialist
> Computerland New Zealand
> PO Box 3631, Auckland
> DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
> mailto: justin.menga@computerland.co.nz
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:01 GMT-3