From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Sat Dec 09 2000 - 06:17:34 GMT-3
Hi,
I'm trying to get one of my routers to dial out to an ISP. I can't seem to
get it to go. I would have thought you can use the default chat script and
then just use PPP PAP authentication, but it doesn't work. Do I need to use
a login script, and if so, what is the format:
interface Serial1
physical-layer async
ip address negotiated
no ip directed-broadcast
encapsulation ppp
dialer in-band
dialer string *52086733322
dialer-group 1
async default routing
async mode dedicated
fair-queue 64 16 0
ppp chap hostname mengaj
ppp chap password 7 08354D40001851
ppp pap sent-username mengaj password 7 03105A050F0E75
line 2
no exec
autoselect ppp
modem InOut
modem autoconfigure discovery
transport input all
speed 115200
dialer-list 1 protocol ip permit
R2#debug ppp negotiation
02:33:09: Se1 LCP: TIMEout: State REQsent
02:33:09: Se1 LCP: O CONFREQ [REQsent] id 27 len 20
02:33:09: Se1 LCP: ACCM 0x000A0000 (0x0206000A0000)
02:33:09: Se1 LCP: MagicNumber 0x01CE441C (0x050601CE441C)
02:33:09: Se1 LCP: PFC (0x0702)
02:33:09: Se1 LCP: ACFC (0x0802)
Regards,
Justin Menga MCSE+I CCNP CCSE ASE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:00 GMT-3