From: Fenris (ccie_study@xxxxxxxxxxx)
Date: Fri Dec 08 2000 - 10:21:12 GMT-3
Mate,
Snapshot routing is only for IGRP & RIP.
Fenris
----- Original Message -----
From: "Nickel, Shawn" <Shawn.Nickel@getronics.com>
To: "'James Chen'" <jr_chen@ringline.com.tw>; "Nickel, Shawn"
<Shawn.Nickel@getronics.com>
Cc: "CCIE Group Study (E-mail)" <ccielab@groupstudy.com>
Sent: Thursday, December 07, 2000 9:00 PM
Subject: RE: [Q]IPX DDR with Snapshot
> 34238 85BE Cisco Enhanced Interior Routing Protocol (EIGRP)
> ftp://ftp.isi.edu/in-notes/iana/assignments/novell-sap-numbers/
> it look like eigrp is keeping up the line!!!!
>
> -----Original Message-----
> From: James Chen [mailto:jr_chen@ringline.com.tw]
> Sent: Thursday, December 07, 2000 12:23 PM
> To: Nickel, Shawn
> Cc: CCIE Group Study (E-mail)
> Subject: Re: [Q]IPX DDR with Snapshot
>
>
> Sir, I don't put any netware server on this segment, even the static sap
> comand.
>
> I have also found :
> This packets has ds=85BE, ss=85BE , what is the socket of 85BE ?
>
> *Mar 1 10:37:50: IPX: Fa0/0:65.0000.0c3f.5674->65.ffff.ffff.ffff ln= 70
> tc=00
> p
> t=00 ds=85BE ss=85BE, local
> *Mar 1 10:37:51: IPX: local:35.0005.0005.0005->35.ffff.ffff.ffff ln= 70
> tc=00
> p
> t=00 ds=85BE ss=85BE, encap failed
> R5#
> *Mar 1 10:37:54: IPX: Fa0/0:65.0000.0c3f.5674->65.ffff.ffff.ffff ln= 70
> tc=00
> p
> t=00 ds=85BE ss=85BE, rcvd
> *Mar 1 10:37:54: IPX: Fa0/0:65.0000.0c3f.5674->65.ffff.ffff.ffff ln= 70
> tc=00
> p
> t=00 ds=85BE ss=85BE, local
> R5#
>
> Since I found the messages, I think this is the hello of EIGRP , so I
think
> I
> should not use
> EIGRP in ISDN , right ?
>
> *Mar 1 10:40:23: %IPX-6-NOVACCESSLOG: 900 deny 0 eigrp 35.0005.0005.0005
> eigrp
>
> 35.ffff.ffff.ffff 64 pkts
>
> Would you please give me more detail about the following access-list ?
>
> James
>
> "Nickel, Shawn" wrote:
>
> > Do you have a netware server on this segment? If so try putting these
> lines
> > in.
> >
> > access-list 900 deny 1 35.0000.0000.0001 0 35.ffff.ffff.ffff 453
> > access-list 900 deny 4 35.0000.0000.0001 0 35.ffff.ffff.ffff 452
> > access-list 900 deny 4 FFFFFFFF 0 FFFFFFFF 456
> >
> > -----Original Message-----
> > From: James Chen [mailto:jr_chen@ringline.com.tw]
> > Sent: Thursday, December 07, 2000 8:06 AM
> > To: CCIE Group Study (E-mail)
> > Subject: [Q]IPX DDR with Snapshot
> >
> > Hello, Sir:
> >
> > I have problem with IPX DDR with snapshot !
> > The scenario is R3 connect with R5 , and Both R3 and R5 connect to R6
> > If R5 ethernet down , R5 will call to R3 to backup, Otherwise, ISDN will
> > not
> > be called.
> >
> > R5 <- ISDN-> R3 <--->the rest of network
> > | |
> > -------R6-------
> >
> > I use snapshot to do routing backup.
> > And use dialer map ipx 35.0003.0003.0003 8358661 broadcast
> > to dialer to R3 in R5.
> >
> > However, there are two problems :
> >
> > 1. The quiet time of snapshot is 120mins. However, I find that the real
> > quiet time
> > is not 120 mins, it seems several mins only, maybe 8 mins. I don't
> > know what I lost ?
> > 2. The isdn will be pick up by the traffic " 35.0005.0005.0005 to
> > 35.ffff.ffff.ffff"
> > This packet is sent each 5 sec. So the isdn will not be down until I
> > use the
> > access-list to add one line
> > "access-list 900 deny any any all 0.ffff.ffff.ffff
> > FFFF.0000.0000.0000"
> > to the dialer-list , it stop now !
> > what I lost in my dialer-list to deny ? I don't know what the packet
> >
> > "s=35.0005.0005.0005 d=35.ffff.ffff.ffff" is !
> >
> > PLEASE GIVE ME ADVISE ASAP, I have to fly to Sydney for my next attempt
> > tomorrow ! Thanks !
> >
> > My config is as following :
> > ------------------------------
> > R5
> > ---
> > ipx routing 0005.0005.0005
> > isdn switch-type basic-5ess
> > !
> > interface FastEthernet0/0
> > ip address 137.1.65.5 255.255.255.0
> > no ip directed-broadcast
> > duplex auto
> > speed auto
> > ipx network 65
> > !
> > interface Serial0/0
> > ip address 137.1.15.5 255.255.255.0
> > no ip directed-broadcast
> > no ip mroute-cache
> > ipx network 15
> > clockrate 2000000
> > !
> > interface BRI0/0
> > ip address 137.1.35.2 255.255.255.252
> > no ip directed-broadcast
> > encapsulation ppp
> > ip ospf demand-circuit
> > dialer map snapshot 1 name R3 8358661
> > dialer map ip 137.1.35.1 name R3 broadcast 8358661
> > dialer map ipx 35.0003.0003.0003 name R3 broadcast 8358661
> > dialer-group 1
> > ipx network 35
> > no ipx route-cache
> > ipx watchdog-spoof
> > isdn switch-type basic-5ess
> > snapshot client 5 120 dialer
> > ppp authentication pap
> > ppp pap sent-username R5 password 7 060506324F41
> > !
> > access-list 900 deny any any all any sap
> > access-list 900 deny any any all any rip
> > access-list 900 deny any any all any 457
> > access-list 900 deny any any all 0.ffff.ffff.ffff FFFF.0000.0000.0000
> > log
> > ---------------------------------------------------------
> > R3
> > --
> > ipx routing 0005.0005.0005
> > isdn switch-type basic-5ess
> > !
> > ----deleted----
> > !
> > interface BRI0/0
> > ip address 137.1.35.1 255.255.255.252
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer map ip 137.1.35.2 name R5 broadcast
> > dialer-group 1
> > ipx network 35
> > isdn switch-type basic-5ess
> > snapshot server 5
> > ppp authentication pap
> > ppp pap sent-username R3 password 7 1414110209
> > !
> > ---------------------------------------------------------
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:00 GMT-3