From: Jim Brown (Jim.Brown@xxxxxxxxxxxxx)
Date: Thu Dec 07 2000 - 12:03:01 GMT-3
Jim,
Are the remote clients using WINS or static mappings in the HOST or LMHOST
file to identify the PDC/BDC?
If not, the remote clients have no way of locating the PDC or BDC from a
remote network unless you forward the broadcasts.
This sounds like the issue if you have the ability to manually map drives
without the use of the browser service.
-----Original Message-----
From: Jim Bond [mailto:trycisco@yahoo.com]
Sent: Wednesday, December 06, 2000 11:19 PM
To: cisco@groupstudy.com
Cc: ccielab@groupstudy.com
Subject: tough VPN question
Hello,
I'm trying to set up a IPSec between a PIX (branch
office) and router (central office). All PCs at branch
office share 1 ip address. IPSec seems to be working
fine because clients can ping/telnet/email/map drives
from/to central office. The problem is they can't
logon NT domain. They can ping domain controller
though.
Any idea why they can't log on NT domain? (The
machines were already added to domain)
Thanks in advance.
Jim
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:59 GMT-3