From: Chad Marsh (chad@xxxxxx)
Date: Thu Dec 07 2000 - 10:06:05 GMT-3
Make sure you have either WINS or lmhost files. Make sure the router IOS is
12.1(3) or later. Turn of CEF if it's on.
You say the clients can map network drives, can they browse Network
Neighborhood?
Are the clients NT or 95/98? You say email works, is it Outlook/Exchange or
POP?
Chad Marsh
CCIE # 5185
----- Original Message -----
From: "Jim Bond" <trycisco@yahoo.com>
To: <cisco@groupstudy.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, December 06, 2000 10:18 PM
Subject: tough VPN question
> Hello,
>
> I'm trying to set up a IPSec between a PIX (branch
> office) and router (central office). All PCs at branch
> office share 1 ip address. IPSec seems to be working
> fine because clients can ping/telnet/email/map drives
> from/to central office. The problem is they can't
> logon NT domain. They can ping domain controller
> though.
>
> Any idea why they can't log on NT domain? (The
> machines were already added to domain)
>
> Thanks in advance.
>
>
> Jim
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:59 GMT-3