From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Wed Dec 06 2000 - 21:24:18 GMT-3
At 11:09 AM 12/7/00 +1100, Simon Baxter wrote:
>Thanks again Greg.
>
>Another thing or two.
>
>Like the Cat5k, does the 3920 need to have it's VTP stuff set up before you
>can create new TrC/BRFs?
I assume that you can setup VTP on the 3920, but have never had to use it
to use multiple TrC/BRFs.
>I've read you can only associate the default TrCRF with the default TrBRF.
>If you create a new TrBRF, bridge number 5, create two new TrCRFs, numbers
>6&7 and add some ports to the 'CRFs.
>
>If you then connect ring #7 to a router and want to SRB to the devices on 6
>ie the rif will have 7 5 6 for rn-bn-rn...does the BRF need to be set up as
>a SRB 'BRF?
>
>Is it the 'BRF that's configured as a SRB or TB? When would you use the TB
>function?
Don't know. Never used this mode even when doing DLSW and multiple TokenRing
Vlans.
>Also, another more generic bridging question....
>The token ring interfaces on routers support the addition of bridge groups
>as well as SRB. When would you use the following :
>int tok0
>bridge-group 1
So you might want to do this if you want to bridge IP traffic from say the
tokenring
to maybe a ethernet.
- Kevin
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:59 GMT-3