From: Lev Terebizh (lter@xxxxxxxxxxxxxxxx)
Date: Wed Dec 06 2000 - 06:20:34 GMT-3
See at this link.... It's all clear...
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3920/ct3920ug/vlantut
.htm
----- Original Message -----
From: "Wu, Jiang" <wujiang@bj163.com>
To: "Simon Baxter" <simon_baxter@hotmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, December 06, 2000 11:20
Subject: Re: Token Ring HELP!!!
> Every TrCRF must have one TrBRF. TrCRFs belong to the same TrBRF are
*bridged". So if you needed to configure 2 separate rings on a 3920 switch,
setup two different TrBRFs and each attahed by a TrCRF.
>
> ----- Original Message -----
> From: Simon Baxter <simon_baxter@hotmail.com>
> To: <ccielab@groupstudy.com>
> Cc: <simon.baxter@au.logical.com>
> Sent: Wednesday, December 06, 2000 10:37 AM
> Subject: Token Ring HELP!!!
>
>
> > Hi, I thought I'd try to send a message from my hotmail account - I
didn't
> > want to miss the opportunity to ask you American's (and anyone else!!!)
> > something tonight...
> >
> >
> > TrCRFs and TrBRFs.
> >
> > I understand that TrBRFs seem to act as a bridge between different
TrCRFs.
> >
> > I also understand that you can configure an SRB (or SRS?) or SRT type of
> > TrCRF or TrBRF.
> >
> > What does all this mean. If you needed to configure 2 separate rings on
a
> > 3900 switch, what exactly is involved???????
> >
> >
> > PLEASE HELP
> >
> > 5 days to go......
> >
> >
> > Simon
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:59 GMT-3