From: Robert DeVito (robertdevito@xxxxxxxxxxx)
Date: Sat Dec 02 2000 - 16:43:55 GMT-3
I have a question about BGP Sync...
If I do a "show ip bgp" I see the following:
Network Next Hop Metric LocPrf Weight Path
*>i206.11.20.16/29 192.168.4.1 0 100 0 300 i
*>i206.11.20.64/29 192.168.4.1 0 100 0 300 i
Now if I do a "show ip route" I see the following:
Gateway of last resort is not set
10.0.0.0/16 is subnetted, 4 subnets
R 10.2.0.0 [120/2] via 192.168.1.2, 00:00:19, Ethernet0
R 10.3.0.0 [120/1] via 192.168.1.2, 00:00:19, Ethernet0
C 10.4.0.0 is directly connected, Loopback0
R 10.5.0.0 [120/2] via 192.168.1.2, 00:00:19, Ethernet0
C 192.168.1.0/24 is directly connected, Ethernet0
R 192.168.2.0/24 [120/1] via 192.168.1.2, 00:00:19, Ethernet0
R 192.168.3.0/24 [120/1] via 192.168.1.2, 00:00:19, Ethernet0
R 192.168.4.0/24 [120/2] via 192.168.1.2, 00:00:19, Ethernet0
C 192.19.15.0/24 is directly connected, Serial1
As you can see I know how to get to the next hop of the two BGP learned
route, if I do not turn sync off I do not see the routes in my routing
table, why? I thought if you have a "*>" next to your route, I should see it
in my routing table and it complies with the rules of BGP sync?
Thank you!
Robert DeVito
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:57 GMT-3