Re: What is that interface in 2948G-L3

From: Jason Dachtler (dachtler@xxxxxxxxx)
Date: Sat Dec 02 2000 - 05:17:08 GMT-3

• Next message: Zeeshan Siddiqui: "Lab swap in Brussels"
• Previous message: Wu, Jiang: "Fw: ipx SAPs to be seen on end routers only ????"
• Maybe in reply to: Li Chaoyong: "What is that interface in 2948G-L3"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
It's a Gig-E interface. See the FX1000 notation?

-Jason

> Li Chaoyong wrote:
>
> 2948G-L3#sh in
> FX1000:1 is up, line protocol is up
> Hardware is WISEMAN
> MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, rely 255/255, load
> 1/255
> Encapsulation ARPA, loopback not set, keepalive not set
> Full-duplex mode, 1000Mb/s, Force link-up, unknown 0
> output flow-control is unsupported, input flow-control is
> unsupported
> ARP type: ARPA, ARP Timeout 04:00:00
> Last input never, output 00:00:00, output hang never
> Last clearing of "show interface" counters 1d08h
> Queueing strategy: fifo
> Output queue 0/65535, 0 drops; input queue 0/75, 0 drops
> 5 minute input rate 5000 bits/sec, 8 packets/sec
> 5 minute output rate 569000 bits/sec, 200 packets/sec
> 304995 packets input, 41086619 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 0 watchdog, 0 multicast, 0 PAUSE input
> 22713236 packets output, 3858334780 bytes, 0 underruns
> 0 output errors, 0 collisions, 0 interface resets
> 0 output buffer failures, 0 output buffers swapped out

• Next message: Zeeshan Siddiqui: "Lab swap in Brussels"
• Previous message: Wu, Jiang: "Fw: ipx SAPs to be seen on end routers only ????"
• Maybe in reply to: Li Chaoyong: "What is that interface in 2948G-L3"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:57 GMT-3