From: Ellington, Chris, BmS - NMI-CK (Chris.Ellington@xxxxxxxxx)
Date: Fri Dec 01 2000 - 09:59:11 GMT-3
Thanks.
chris
-----Original Message-----
From: Marc Russell [mailto:mrussell@ccbootcamp.com]
Sent: Thursday, November 30, 2000 9:11 PM
To: 'Ellington, Chris, BmS - NMI-CK'; 'Kevin Baumgartner';
Timur.Mirza@Notes.airtouch.com; ccielab@groupstudy.com
Subject: RE: ccie lab patch panels
Here is a link to the site you want for V.35 patch panels.
http://www.pulsewan.com/vir/
Marc Russell
CCIE Boot Camp
www.ccbootcamp.com
-----Original Message-----
From: Ellington, Chris, BmS - NMI-CK
[mailto:Chris.Ellington@bmsus.com]
Sent: Thursday, November 30, 2000 4:04 PM
To: 'Kevin Baumgartner'; Ellington, Chris, BmS - NMI-CK;
Timur.Mirza@Notes.airtouch.com; ccielab@groupstudy.com
Subject: RE: ccie lab patch panels
Yes, I was looking to buy a patch panel for my rack; I've got 9
routers with nearly 24 (potential) serial ports; an in and out patch
(RJ45) and a v.35/rs232 in and out patch is essential.
chris
-----Original Message-----
From: Kevin Baumgartner [mailto:kbaumgar@cisco.com]
Sent: Thursday, November 30, 2000 3:21 PM
To: Ellington, Chris, BmS - NMI-CK; Timur.Mirza@Notes.airtouch.com;
ccielab@groupstudy.com
Subject: RE: ccie lab patch panels
Might want to check with Mark Russell with CCIEbootcamp.
I have seen him in this group at times.
Myself I didn't look at getting the cables as it was only a very
minor part of the studying process.
And beside which it was pretty easy to figure out how the cables
worked in the lab.
Kevin
At 02:41 PM 11/30/00 -0500, Ellington, Chris, BmS - NMI-CK wrote:
The below link takes you to the ADC web page; which model number is
it? It would appear to be a 5000, but....
?
chris
-----Original Message-----
From: Kevin Baumgartner [mailto:kbaumgar@cisco.com]
Sent: Thursday, November 30, 2000 12:13 PM
To: Timur.Mirza@Notes.airtouch.com; ccielab@groupstudy.com
Subject: Re: ccie lab patch panels
Here is what I got from Marc Russell with CCIEbootcamp.
- Kevin
> I think the panel is around $1500.00 and the cables are
$40.00 each.
> Then you need the Cisco cables to plug from the serial ports
into the
> back of the patch panel.
http://www.hadax.com/
At 06:50 AM 11/30/00 -0800, Timur.Mirza@Notes.airtouch.com
wrote:
one of the local engineers was wondering if the patch panels &
cables that are
used in the ccie lab are available - i'm not asking anyone to
describe it, only
if there is a source that carries them!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:57 GMT-3