From: Raymond Adi Irawan (Raymond.Irawan@xxxxxxxxx)
Date: Mon Nov 13 2000 - 23:27:01 GMT-3
Hi,
Before doing redistribute connected into isis, I can't see R14,s
directly connected (10.1.11.0/24 and 10.1.5.0/29) in R5's routing
table either.
But after doing "redistribute connected metric 10" into isis,
now those networks are listed in R5.
Maybe you also need clear ip route * after doing the redistribution.
raymond.
-----Original Message-----
From: Perry.Zhu [mailto:zql@liming.com]
Sent: 12 Nopember 2000 18:19
To: ccielab@groupstudy.com
Subject: bootcamp lab 17 / redistribute connected interface into isis
Hi, All
On bootcamp lab17, r14 run ospf and isis, but the isis only enable
on inter s0.2 and loop0.
Bootcamp first redistribute connected interface into ospf then
redistribute the ospf into isis. But I can't find the route of r14's
s0/0.1 10.1.11.0 in isis database. So the only route of 10.1.11.0 in
r5's routing table is from the ISND BRI0.
I try to redistribute the directly connected interface into isis
but failed.
Have any one encountered this problem?
Any input will be appreciated.
Best regards
Perry.Zhu
-------------------------
Tel: 86-755-3630000-1102
Fax: 86-755-3263777
E-mail: zql@liming.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:44 GMT-3