From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Mon Nov 13 2000 - 18:14:00 GMT-3
"sh diag" will show serial number on 2600, 3600
Sam
>
> Use the command show diagbus , it will also give you the modules serial
> numbers & at the end you will the router serial number .
> here is an example:
> 7513rtr>sh diagbus
> Slot 0:
> Physical slot 0, ~physical slot 0xF, logical slot 0, CBus 0
> Microcode Status 0x0
> Master Enable, LED, WCS Loaded
> Board is analyzed
> EEPROM format version 1
> TRIP controller, HW rev 1.04, board revision M0
> Serial number: 05412141 Part number: 73-0973-03
> Test history: 0x0E RMA number: 15-80-07
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 05 01 04 00 52 95 2D 49 03 CD 03 0E 0F 50 07
> 0x30: B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
> Slot 1:
> Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0
> Microcode Status 0x0
> Master Enable, LED, WCS Loaded
> Board is analyzed
> EEPROM format version 1
> FSIP controller, HW rev 1.01, board revision A0
> Serial number: 01283469 Part number: 73-1126-05
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 07 01 01 00 13 95 8D 49 04 66 05 00 00 00 00
> 0x30: 50 04 F1 00 FF 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
> Slot 2:
> Physical slot 2, ~physical slot 0xD, logical slot 2, CBus 0
> Microcode Status 0x0
> Master Enable, LED, WCS Loaded
> Board is analyzed
> EEPROM format version 1
> FSIP controller, HW rev 1.01, board revision A0
> Serial number: 01382591 Part number: 73-1126-05
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 07 01 01 00 15 18 BF 49 04 66 05 00 00 00 00
> 0x30: 50 04 F1 00 FF 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
> Slot 3:
> Physical slot 3, ~physical slot 0xC, logical slot 3, CBus 0
> Microcode Status 0x0
> Master Enable, LED, WCS Loaded
> Board is analyzed
> EEPROM format version 1
> TRIP controller, HW rev 1.04, board revision M0
> Serial number: 01666409 Part number: 73-0973-03
> Test history: 0x0E RMA number: 12-87-97
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 05 01 04 00 19 6D 69 49 03 CD 03 0E 0C 57 61
> 0x30: B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
> Slot 4:
> Physical slot 4, ~physical slot 0xB, logical slot 4, CBus 0
> Microcode Status 0x0
> Master Enable, LED, WCS Loaded
> Board is analyzed
> EEPROM format version 1
> EIP controller, HW rev 1.05, board revision B0
> Serial number: 01857303 Part number: 73-0906-04
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 00 01 05 00 1C 57 17 49 03 8A 04 00 00 00 00
> 0x30: 58 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
> Slot 5:
> Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 0
> Microcode Status 0x0
> Master Enable, LED, WCS Loaded
> Board is analyzed
> EEPROM format version 1
> EIP controller, HW rev 1.07, board revision D0
> Serial number: 04075850 Part number: 73-0906-04
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 00 01 07 00 3E 31 4A 49 03 8A 04 00 00 00 00
> 0x30: 68 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
> Slot 6:
> EEPROM format version 1
> Route/Switch Processor 4, HW rev 1.00, board revision A0
> Serial number: 08194131 Part number: 73-1689-03
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 1A 01 00 00 7D 08 53 49 06 99 03 00 00 00 00
> 0x30: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Slot 7:
> EEPROM format version 1
> Route/Switch Processor 4, HW rev 1.00, board revision A0
> Serial number: 08194130 Part number: 73-1689-03
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 1A 01 00 00 7D 08 52 49 06 99 03 00 00 00 00
> 0x30: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Slot 8:
> Physical slot 8, ~physical slot 0x7, logical slot 8, CBus 0
> Microcode Status 0x4
> Master Enable, LED, WCS Loaded
> Board is analyzed
> Pending I/O Status: None
> EEPROM format version 1
> VIP2 controller, HW rev 2.11, board revision C0
> Serial number: 10012834 Part number: 73-1684-04
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 15 02 0B 00 98 C8 A2 49 06 94 04 00 00 00 00
> 0x30: 60 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
>
> Controller Memory Size: 32 MBytes DRAM, 2048 KBytes SRAM
>
> PA Bay 0 Information:
> Fast-Ethernet PA, 2 ports, 100BaseTX-ISL
> EEPROM format version 1
> HW rev 1.01, Board revision A0
> Serial number: 12377725 Part number: 73-2618-02
>
> PA Bay 1 Information:
> Mx HSSI-B PA, 1 ports
> EEPROM format version 1
> HW rev 1.17, Board revision A0
> Serial number: 11544329 Part number: 73-2559-05
>
> --Boot log begin--
>
> Cisco Internetwork Operating System Software
> IOS (tm) VIP Software (SVIP-DW-M), Version 12.0(7), RELEASE SOFTWARE (fc1)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Wed 13-Oct-99 22:05 by phanguye
> Image text-base: 0x60010920, data-base: 0x60224000
>
>
> --Boot log end--
>
> Slot 9:
> Physical slot 9, ~physical slot 0x6, logical slot 9, CBus 0
> Microcode Status 0x4
> Master Enable, LED, WCS Loaded
> Board is analyzed
> Pending I/O Status: None
> EEPROM format version 1
> VIP2 R5K controller, HW rev 2.02, board revision D0
> Serial number: 12677786 Part number: 73-2167-05
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 1E 02 02 00 C1 72 9A 49 08 77 05 00 00 00 00
> 0x30: 68 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
>
> Controller Memory Size: 32 MBytes DRAM, 4096 KBytes SRAM
>
> PA Bay 0 Information:
> ENHANCED ATM OC3 MM PA, 1 ports
> EEPROM format version 1
> HW rev 2.00, Board revision A0
> Serial number: 14317867 Part number: 73-2430-04
>
> --Boot log begin--
>
> Cisco Internetwork Operating System Software
> IOS (tm) VIP Software (SVIP-DW-M), Version 12.0(7), RELEASE SOFTWARE (fc1)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Wed 13-Oct-99 22:05 by phanguye
> Image text-base: 0x60010920, data-base: 0x60224000
>
>
> --Boot log end--
>
> Slot 10:
> Physical slot 10, ~physical slot 0x5, logical slot 10, CBus 0
> Microcode Status 0x4
> Master Enable, LED, WCS Loaded
> Board is analyzed
> Pending I/O Status: None
> EEPROM format version 1
> VIP2 controller, HW rev 2.11, board revision E0
> Serial number: 11513360 Part number: 73-1684-04
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 15 02 0B 00 AF AE 10 49 06 94 04 00 00 00 00
> 0x30: 70 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
>
> Controller Memory Size: 32 MBytes DRAM, 2048 KBytes SRAM
>
> PA Bay 0 Information:
> Fast-Ethernet PA, 2 ports, 100BaseTX-ISL
> EEPROM format version 1
> HW rev 1.01, Board revision A0
> Serial number: 14013917 Part number: 73-2618-02
>
> PA Bay 1 Information:
> Fast-Ethernet PA, 2 ports, 100BaseTX-ISL
> EEPROM format version 1
> HW rev 1.00, Board revision A0
> Serial number: 12377596 Part number: 73-2618-02
>
> --Boot log begin--
>
> Cisco Internetwork Operating System Software
> IOS (tm) VIP Software (SVIP-DW-M), Version 12.0(7), RELEASE SOFTWARE (fc1)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Wed 13-Oct-99 22:05 by phanguye
> Image text-base: 0x60010920, data-base: 0x60224000
>
>
> --Boot log end--
>
> Slot 11:
> Physical slot 11, ~physical slot 0x4, logical slot 11, CBus 0
> Microcode Status 0x0
> Master Enable, LED, WCS Loaded
> Board is analyzed
> EEPROM format version 1
> FSIP controller, HW rev 1.12, board revision A0
> Serial number: 05034637 Part number: 73-1126-06
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 07 01 0C 00 4C D2 8D 49 04 66 06 00 00 00 00
> 0x30: 50 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
> Slot 12:
> Physical slot 12, ~physical slot 0x3, logical slot 12, CBus 0
> Microcode Status 0x4
> Master Enable, LED, WCS Loaded
> Board is analyzed
> Pending I/O Status: None
> EEPROM format version 1
> VIP2 R5K controller, HW rev 2.02, board revision C0
> Serial number: 12677179 Part number: 73-2167-05
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 1E 02 02 00 C1 70 3B 49 08 77 05 00 00 00 00
> 0x30: 60 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x2B08 (30w0d ago)
>
> Controller Memory Size: 32 MBytes DRAM, 4096 KBytes SRAM
>
> PA Bay 0 Information:
> ENHANCED ATM OC3 MM PA, 1 ports
> EEPROM format version 1
> HW rev 2.00, Board revision A0
> Serial number: 14318184 Part number: 73-2430-04
>
> --Boot log begin--
>
> Cisco Internetwork Operating System Software
> IOS (tm) VIP Software (SVIP-DW-M), Version 12.0(7), RELEASE SOFTWARE (fc1)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Wed 13-Oct-99 22:05 by phanguye
> Image text-base: 0x60010920, data-base: 0x60224000
>
>
> --Boot log end--
>
> Slot 31 (virtual):
> EEPROM format version 1
> Chassis Interface, HW rev 1.00, board revision B0
> Serial number: 07264779 Part number: 73-1306-02
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board
>
> EEPROM contents (hex):
> 0x20: 01 10 01 00 00 6E DA 0B 49 05 1A 02 00 00 00 00
> 0x30: 58 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
> 7513rtr>
>
>
>
>
> Andy Singh
> <asingh@slamdunknet To: "'Curtis Phillips'"
<phillipscurtis@netscape.net>,
> works.com> ccielab@groupstudy.com
> Sent by: cc:
> nobody@groupstudy.c Subject: RE: A way to
determine router S/N remotely?
> om
>
>
> 11/13/2000 02:40 PM
> Please respond to
> Andy Singh
>
>
>
>
>
>
> Dependz on the router i guess. on 3660 you can do sh c3600 and it'll give
> you the serial number
>
> -----Original Message-----
> From: Curtis Phillips [mailto:phillipscurtis@netscape.net]
> Sent: Saturday, November 11, 2000 6:41 AM
> To: ccielab@groupstudy.com
> Subject: A way to determine router S/N remotely?
>
>
> Sorry if this is a little off-topic but.. Does anyone know a way to
> determine
> a router serial number though a remote telnet session?
>
> Thanks,
>
> Curtis
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:44 GMT-3