From: Roger, Michael (Michael.Roger@xxxxxxxxxxxxx)
Date: Thu Nov 09 2000 - 12:09:43 GMT-3
YOU CANNOT UPGRADE THE 2500 VIA CONSOLE OR AUX. There are some platforms
that can use xmodem (16XX,36XX) but most cannot. Here is the link that
proves that:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_c
/fcprt2/fcimages.htm#xtocid1196637
Mike
-----Original Message-----
From: JKimes1@aol.com [mailto:JKimes1@aol.com]
Sent: Thursday, November 09, 2000 1:32 AM
To: Michael.Roger@getronics.com; ron@xtranetsolutions.com;
ccielab@groupstudy.com
Subject: Re: help_upgrade IOS via aux or con
I think that I may beg to differ (I think because I've done it with 26xx
and
36xx routers, but haven't tried a 25xx yet).
Other routers I can boot up into BOOT ROM mode and initiate an X-Modem
transfer. It is usually advisable to increase the console baud rate before
starting the transfer, but this method has worked for me!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:43 GMT-3