From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Tue Nov 07 2000 - 16:39:47 GMT-3
This is the correct way of doing it. Following will work as well.
user r1 pass cisco
user r2 pass cisco
By having both username and password pair on each router will work. The
correct method is posted below.
Sam
> This has worked for me. If you notice, the sent-username is the same as
the
> host router:
>
> r1
> !
> username r4 password 0 ccie
> isdn switch-type basic-ni1
> !
> interface BRI0
> ip address 172.16.14.1 255.255.255.0
> encapsulation ppp
> ip ospf network point-to-multipoint
> ip ospf demand-circuit
> ipx network 1014
> no ipx route-cache
> ipx watchdog-spoof
> ipx spx-spoof
> isdn spid1 40888830000101
> isdn spid2 40888830000102
> no peer neighbor-route
> dialer map ip 172.16.14.4 name r4 broadcast 8887000
> dialer map ipx 1014.00d0.58ad.ad32 name r1 broadcast 8887000
> dialer-group 1
> snapshot server 5
> ppp authentication pap
> ppp pap sent-username r1 password 7 030752180500 (cisco)
>
> username r4 password 0 ccie
> isdn switch-type basic-ni1
>
> r4
> !
> username r1 password 0 cisco
> isdn switch-type basic-ni1
> !
> interface BRI0
> ip address 172.16.14.4 255.255.255.0
> encapsulation ppp
> ip ospf network point-to-multipoint
> ipx network 1014
> no ipx route-cache
> ipx watchdog-spoof
> ipx spx-spoof
> isdn spid1 40888870000101
> isdn spid2 40888870000102
> no peer neighbor-route
> dialer map ip 172.16.14.1 name r1 broadcast 8883000
> dialer map ipx 1014.00d0.58ad.c5d2 name r1 broadcast 8883000
> dialer map ipx 1014.00d0.58ad.0c5d name r1 broadcast 8883000
> dialer-group 1
> snapshot client 5 1200
> ppp authentication pap
> ppp pap sent-username r4 password 7 0307580203 (ccie)
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:43 GMT-3