From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Tue Nov 07 2000 - 11:39:55 GMT-3
But will it send summary route? Here is my ASCII drawing.
172.16.10.0/24--(e0)R1(e1)----172.16.20.0/24----(e1)R2(e0)---
If R1 and R2 are using RIP1. and you use "ip summary-route 172.16.0.0 mask
255.255.0.0" on E1 or R1, will it show up on R2? I tried and it doesn't.
Because RIP1 doesn't have subnet mask in update so R1 will send out only /24
networks to a /24 interface.
If somebody have it working against the behavior of RIP1 please post configs
and routing table.
Sam
> Set the router to send only RIPv1 updates, may need to apply a
distribute-list.
>
> ----- Original Message -----
> From: Daniel Keller <DMKeller@comdisco.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, November 07, 2000 10:20 AM
> Subject: RIP summary routes?
>
>
> >
> > Is it possible to send a summary route to a neighbor? I have a practice
lab that asks me to configure RIP to only unicast a summary route of
140.1.0.0 to a neighbor router. I have searced CCO and tried doing this
with no luck. Is this even possible or is the author of the lab on drugs?
> >
> > DK
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:42 GMT-3